LiquidWood puts the strength back into rotten timber. Rotten, spongy wood impregnated with LiquidWood becomes stiff and consolidated. LiquidWood does not contain any VOCs or noxious odours and is GREENGUARD certified.
A two-part, low viscosity epoxy resin, soaks deep into the wood fibres. Application is by brush, pouring or injection into previously drilled holes. The drier and more porous the wood, the deeper LiquidWood penetrates. Once cured the timber is harder and stronger than it was originally. LiquidWood is easy to use, simply stir together equal parts A and B until fully blended. The approximate pot life is 30 minutes and it takes 24 hours to cure fully.
LiquidWood is suitable for use indoors or outdoors. LiquidWood makes it possible to restore a piece of rotten timber rather than cut it out or replace entirely. For example a rotted windowsill, window frame or section of timber cladding, can become rigid, strong, durable, water and weather-resistant and good as new. Once treated you can saw, plane, drill, nail, paint, rout or sand the wood.
After treatment with LiquidWood, fill any missing areas or voids using Abatron WoodEpox two-part epoxy putty.
The 12fl oz kit includes 6 fl oz (0.355L) of each LiquidWood A and B and the 2 Pints kit includes 1 pt (0.95L) of each.
|Drying Time||24 hours|
|Usage||Interior or Exterior|