These two-piece cutter sets offer an economical way of producing the profile and scribe cuts used in the manufacture of frames for panelled cabinet doors and drawer fronts. The making of items like kitchen doors, bath panels or even display cabinets is achievable using this reversible stile and rail cutter. The cutters and bearing are arranged on the arbor to produce the profile cut on both the stiles and the rails and repositioned to cut the scribe, or counter profile on the ends of the rails. Please note that for reasons of accuracy and safety these cutters should only be used in a router table. The timber should be positioned to face down on the table for the profiling cut and face up for the scribe cut.
Recommended Timber Thickness: 18 to 22mm.
|Shank Diameter||1/2" (12.7 mm)|
|C = Width of Groove||6.35 mm (1/4")|
|D = Overall Diameter||41 mm (1.5/8")|
|H = Horizontal Depth of Cut||9.5 mm (3/8")|
|X = Depth of Cut||17 mm|