An industrial finishing nailer for both interior and exterior use. The non-marking tip device and the adjustable depth control make it just as good for fine furniture and upholstery work as it is for battening and framing. Easy loading of nails into the rear entry angled magazine coupled with the powerful nailing action make this a real time saver on site. The swivelling exhaust deflector and rubber grip handle makes for comfortable use. The nails are 34°, 15 gauge (1.8mm) with 3mm heads. The nailer will take nails with a minimum length of 15mm and a max of 50mm. The tool has a 1/4" male bayonet fitting. Lubricate regularly. Please refer to Airline Fittings section for details of suitable airlines and fittings. Supplied in a plastic storage case.
|Air Consumption||7 cfm / 198.2 l/m|
|Load Capacity||100 nails|
|Nett Weight||2.53 kg|
|Operating Pressure||70 to 120 psi / 4.8 to 8.3 bar|
|Overall L x W x H||345 mm x 120 mm x 305 mm|