Axminster Craft AC37E 1HP Extractor
Customers Also Bought
Frequently Bought Together
This extractor can be used in small home workshops for common wood machining tasks where a higher airflow than provided by a vacuum extractor is required.
The quiet running induction motor provides plenty of power to extract from many small workshop machines. The inlet diameter is 100mm(4"), the outlet into the bag is 100mm(4") and the airflow is sufficient to handle the majority of waste likely to be produced in the small home workshop.
A useful feature is that it can be used either on the floor or suspended from a sturdy wall using the two hanging brackets provided. A useful grab handle and castors allow easy mobility. Hose not supplied; see extraction hose selection for further details.
Please note that this is a chippings extractor and should not be expected to collect fine dust. As with all the high volume low pressure airflow machines, the inlet should not be restricted to below 75mm diameter and the bag should be emptied regularly. Spare bag provided.
- Chip extractor for many machines in a home workshop
- 850m³/hr airflow, 750W, 230V 1ph motor
- Inlet diameter is 100mm
- Base fitted with castors and grab handle for easy mobility
- Quiet and efficient, will not offend your neighbours
- Can be used suspended from a wall, brackets are provided