Earn Points & Save Pounds
Axminster Professional Rip Fence Upgrade
100205
Axminster Professional Rip Fence Upgrade
100205
Key Features
- Upgrade for old and worn rip fences
- Simple to fit, set up, and use
- Ball bearing guiding for easy running
- Rigid mounting rail and fence extrusion
- Simple vertical clamping lever
- View full description
Customers Also Viewed
Recommended Accessories
-
-
WoodSpur Torx Head Wood Screw Assortment (1,500 Pieces)Special Price £24.98 £20.82 was £29.98 £24.98 Save £5.00 £4.17 -
-
Rider Square Blade Awl with Hornbeam HandleFrom £8.78 £7.32 -
-
Axminster Workshop Four Grit Diamond HoneFrom £5.78 £4.82 -
UJK 50mm Guide Dogs (Pair)From £14.98 £12.48 -
-
Axminster Professional Forged Flat Bar Clamp 200 x 80mmFrom £15.58 £12.98 -
Axcaliber 12 Piece 1/4" (6.35mm) Long Shank Cutter SetSpecial Price £79.63 £66.36 was £89.98 £74.98 Save £10.35 £8.62 -
-
Show more
Show less
Frequently Bought Together
This excellent rip fence upgrade is a godsend to anyone struggling with a worn or sub-standard bandsaw or table saw fence on an otherwise well performing machine. It is made from aluminium extrusions and features ball bearings for smooth running, adjustment for squareness, graduated scales and a quick action locking handle. The support rail fits to the front edge of the saw table with two brackets with holes positioned 23mm below the table surface. The brackets can be positioned along the length of the rail to suit different sized tables. If the table edge is not deep enough then simple angle brackets can be made to mount the rail. The length of the rail is 740mm and the fence is 550mm long by 65mm deep. The fence extrusion has tee slots on three faces for mounting false fences and other accessories. Altogether a very well-produced and effective accessory for upgrading your bandsaw or table saw.