{"title":"Accessories for Pillar Drills","description":"","products":[{"product_id":"axminster-morticing-attachment","title":"Axminster Morticing Attachment","description":"\u003cp\u003eThis attachment offers a simple and convenient way of converting a pillar drill into a lightweight morticing machine, provided that the collar diameter (the part where the chuck guard normally fits) is either 65mm, 60mm or 55mm. Best mounted on to an MDF base plate (not supplied), the attachment works well once the mortice bits have been cut down to a length to suit the pillar drill being used. When installing the chisel and bit together, ensure that there is a minimum of 1.5mm of clearance between the bit and the chisel and that the bit is securely tightened to avoid damage to the chisel. The attachment has a 65mm mounting diameter and is supplied with an adaptor which allows for fitting to 60 or 55mm diameter collars. Takes 3\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e shank chisel and bits (not included).\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54115911860571,"sku":"610053","price":27.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/610053_xl.jpg?v=1789757950"},{"product_id":"axminster-13mm-keyed-chuck-b16","title":"Axminster 13mm Keyed Chuck - B16","description":"\u003cp\u003eA good general purpose drill chuck with no arbor, suitable for use in pillar drills and lathes. The jaws close right down to almost nothing for use with very small drill bits. Jaw opening range is 1-13mm, chuck key included. Machined with a B16 arbor fitting. Available with a choice of Morse Taper 1, 2 or 3 arbors separately.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116678271323,"sku":"700406","price":8.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/700406_xl.jpg?v=1789762388"},{"product_id":"axminster-engineer-series-13mm-super-precision-drill-chuck","title":"Axminster Engineer Series 13mm Super Precision Drill Chuck","description":"\u003cp\u003eSuperb precision chuck with excellent run out of 0.15mm maximum and outstanding torque transmission characteristics. For use in pillar drills, mills or lathes. Well presented, with close fitting key and  precision ground tapers. A firm favourite with our own servicing and production workshops. Suitable ground arbors are available separately. Takes drill bits from 1-13mm. The 13mm chuck has a J6 taper.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116678435163,"sku":"500228","price":24.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/500228_xl.jpg?v=1789762396"},{"product_id":"axminster-pillar-drill-chuck-guards","title":"Axminster Pillar Drill Chuck Guards","description":"\u003cp\u003eA range of chuck guards to fit the majority of small to medium sized pillar drills from most brands. Available in a range of collars sizes from 40-92mm. Flip-up design with a clear Perspex guard that is adjustable for height. Please measure your drill presses collar before ordering.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"40 mm","offer_id":54117321507163,"sku":"951784","price":4.98,"currency_code":"GBP","in_stock":false},{"title":"55 mm","offer_id":54117321539931,"sku":"951785","price":6.65,"currency_code":"GBP","in_stock":true},{"title":"60 mm","offer_id":54117321572699,"sku":"951786","price":7.07,"currency_code":"GBP","in_stock":true},{"title":"75 mm","offer_id":54117321605467,"sku":"951787","price":8.32,"currency_code":"GBP","in_stock":true},{"title":"92 mm","offer_id":54117321638235,"sku":"951788","price":9.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/951788_xl.jpg?v=1789765072"},{"product_id":"axminster-13mm-keyless-chuck","title":"Axminster 13mm Keyless Chuck","description":"\u003cp\u003eHigh precision, rugged, all steel drill chucks with B16 mounting tapers. Equally suitable for use in drill presses, milling machines or all types of lathes. The jaw opening range is 0-13mm. This chuck fits the optional B16- 1, 2 or 3MT arbors listed separately. A chuck to upgrade the standard chucks offered on some machines, or as accessories for wood or metal turning lathes.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118342590811,"sku":"700404","price":42.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/700404_xl.jpg?v=1789776605"},{"product_id":"axminster-16mm-keyless-chuck","title":"Axminster 16mm Keyless Chuck","description":"\u003cp\u003eHigh precision, rugged, all steel drill chucks with B16 mounting tapers. Equally suitable for use in drill presses, milling machines or all types of lathes. The jaw opening range is 3-16mm. This chuck fits the optional B16- 1, 2 or 3MT arbors listed separately. A chuck to upgrade the standard chucks offered on some machines, or as accessories for wood or metal turning lathes.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118342754651,"sku":"700405","price":48.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/700405_xl.jpg?v=1789776614"},{"product_id":"ujk-vee-block-for-drill-table-fence","title":"UJK Vee Block for Drill Table \u0026 Fence","description":"\u003cp\u003eThis Vee block is an optional accessory for the UJK Drill Table and Fence. It simply bolts into the table in place of the sacrificial plate. This block allows you to accurately drill round workpieces. It has a centring hole for accurate placing for the drill bit. A simple and worthwhile accessory. Size 115mm x 100mm.\u003c\/p\u003e","brand":"UJK","offers":[{"title":"Default Title","offer_id":54118389809499,"sku":"106699","price":33.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106699_xl.jpg?v=1789778106"},{"product_id":"ujk-drill-table-fence-for-pillar-drills","title":"UJK Drill Table \u0026 Fence for Pillar Drills","description":"\u003cp\u003eMost pillar drills are designed for metal working processes rather than woodworking. This UJK Pillar Drill Table will enhance your pillar drill, supporting the workpiece for better drilling accuracy or delicate sanding or shaping tasks. Made from 26mm thick MDF it features an aluminium extrusion fence with sliding sub faces, a dust port for drum sanding extraction and a flip over length stop for repeat hole positioning. A sacrificial plate protects the centre area.\u003c\/p\u003e\u003cp\u003eThe fence slides on twin T tracks, into which you can also mount clamps. The sub faces give extra support for long pieces, whilst there is a combined RH\/LH scale for the flip over stop.\u003c\/p\u003e\u003cp\u003eThere are a couple of clever features of note, the sacrificial plate is slightly offset, the whole table is reversible so that an extensive range of machine throat depths can be accommodated. The other lies underneath; there are two bars which have three alternative mounting positions, giving a width range of between 310mm-490mm. There are two toggle clamps with 50mm of adjustment, so almost all pillar drills can have this table mounted. Once the mounts are set to your machine, it takes seconds to lift this table on or off.\u003c\/p\u003e\u003cp\u003eOne final twist is the optional V block, which bolts in place of the sacrificial plate, allowing cylindrical parts to be drilled. There is a centre hole to allow accurate positioning.\u003c\/p\u003e\u003cp\u003eConvert your pillar drill into a machine much better suited to woodworking with this nicely designed table. The drill table fits all Axminster professional Pillar Drills: AP340PD (code: 107704), AT325PD (code: 107705), AT700PD (code: 107706), AT540PD (code: 107707).\u003c\/p\u003e","brand":"UJK","offers":[{"title":"Default Title","offer_id":54118389875035,"sku":"106702","price":193.32,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106702_xl.jpg?v=1789778114"},{"product_id":"ujk-flip-stop-for-drill-table-router-table","title":"UJK Flip Stop for Drill Table \u0026 Router Table","description":"\u003cp\u003eThis flip or repeat stop is an addition to the one supplied with the AXMINSTER CABINET ROUTER TABLE or the UJK DRILL TABLE \u0026amp; FENCE. It gives you the potential of having two common length settings without the need to reset. Having a second flip stop greatly simplifies making stopped chamfers or rebates on the router table. On the drill, it can set the start and stop position for chain drilling. When not in use it can be flipped up out of the way until required. Made from an anodised aluminium extrusion, it comes with a Bristol locking handle for quick and easy repositioning.\u003c\/p\u003e","brand":"UJK","offers":[{"title":"Default Title","offer_id":54118444958043,"sku":"108317","price":15.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/108317_xl.jpg?v=1789780441"},{"product_id":"axminster-drill-press-table","title":"Axminster Drill Press Table","description":"\u003cp\u003eThe Axminster Drill Press Table turns your Drill Press into a far more woodworking friendly machine. Its universal design and simplicity of fixing allows it to fit onto a wide range of drill presses. T-slots on the underside allow the three holding clamps to be positioned easily and adjusted to a wide variety of shapes and sizes of drill press table.\u003c\/p\u003e\u003cp\u003eThe standard drill table is designed around metal working. This super upgrade gives you a far larger work surface for greater support of larger work pieces and allows you to drill accurate repeat holes. The table measures in at 605mm x 300mm x 25mm thick offering spacious solid support. The unique design provides clearance for the height adjustment crank handle on most drill presses. A 50mm high adjustable fence and sliding stop block offer greater work support and increased accuracy. The table comes with five clamps in total, three for use on the underside and two for use as work holding clamps on the top. The removable insert allows you to drill completely through the workpiece without damaging the table. Suitable for drill press tables up to 450mm wide and 50mm thick.\u003c\/p\u003e\u003cp\u003eTable Dimensions: 605mm x 300mm\u003c\/p\u003e\u003cp\u003eFence Dimensions: 600mm x 50mm\u003c\/p\u003e\u003cp\u003eDrill Press Table Thickness: 25mm\u003c\/p\u003e\u003cp\u003eT-Track Centre to Centre: 108mm\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118484541787,"sku":"109540","price":41.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109540_xl.jpg?v=1789782069"},{"product_id":"faithfull-pin-chuck-set-0-2-5mm","title":"Faithfull Pin Chuck Set 0 - 2.5mm","description":"\u003cp\u003eThe Faithfull pin chuck is a useful accessory for holding drills too small to be held by standard capacity drill chucks. Suitable for use with pillar drills, this pin chuck is a great addition to any workshop.\u003c\/p\u003e\u003cp\u003eSupplied with three collets of the following sizes: 1 x 0 - 0.75mm (0 - 1\/32\u003cspecial id=\"32\"\u003e\u003c\/special\u003e). 1 x 0.75 - 1.5mm (1\/32 - 1\/16\u003cspecial id=\"32\"\u003e\u003c\/special\u003e). 1 x 1.5 - 2.5mm (1\/16 - 3\/32\u003cspecial id=\"32\"\u003e\u003c\/special\u003e).\u003c\/p\u003e","brand":"Faithfull","offers":[{"title":"Default Title","offer_id":54118500008283,"sku":"109998","price":14.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109998_xl.jpg?v=1789782949"},{"product_id":"axminster-universal-chuck-guard","title":"Axminster Universal Chuck Guard","description":"\u003cp\u003eThe Axminster Professional Universal Chuck Guard is a safety upgrade, compatible with most pillar drills and vertical mills. It’s easy to install using just two bolts and comes with a mounting bracket, which secures to the side of your drill. The large, clear shield gives you excellent visibility of your work while helping to protect you from the rotating chuck.\u003c\/p\u003e\u003cp\u003eA key feature of this chuck guard is its integrated rotary micro switch that can connect to your drill’s NVR switch. This means the drill won’t run unless the guard is in place, adding an extra layer of safety. The guard is fitted as standard on Axminster Professional pillar drills, making it a trusted choice for both professional workshops and safety-conscious hobbyists. Whether you're upgrading an existing drill or outfitting a new one, this universal guard offers a practical and reliable solution for safer drilling operations.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118591168859,"sku":"112896","price":20.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/112896_xl.jpg?v=1789787608"}],"url":"https:\/\/www.axminstertools.com\/collections\/accessories-for-pillar-drills.oembed","provider":"Axminster Tools","version":"1.0","type":"link"}