{"title":"Biscuit Jointing Blades \u0026 Accessories","description":"","products":[{"product_id":"lamello-biscuits","title":"Lamello Biscuits","description":"\u003cp\u003eLamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm. These solid wood biscuits come from responsibly managed, FSC-certified forests.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"No. 0 \/ 1000","offer_id":54115722723675,"sku":"340944","price":23.32,"currency_code":"GBP","in_stock":true},{"title":"No. 10 \/ 1000","offer_id":54115722756443,"sku":"340946","price":23.82,"currency_code":"GBP","in_stock":true},{"title":"No. 20 \/ 1000","offer_id":54115722789211,"sku":"340948","price":24.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340944_xl.jpg?v=1789756466"},{"product_id":"lamello-h9-small-biscuits","title":"Lamello H9 Small Biscuits","description":"\u003cp\u003eH9 are smaller than normal biscuits, 38 x 12mm and thinner at only 3mm. They require a 78mm diameter cutter. These solid wood biscuits come from responsibly managed, FSC-certified forests.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54115967041883,"sku":"144009","price":38.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/144009_xl.jpg?v=1789759224"},{"product_id":"lamello-h9-cutter","title":"Lamello H9 Cutter","description":"\u003cp\u003eThis cutter has a narrow kerf of just 3mm to suit the H9 biscuits.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54115967140187,"sku":"132009","price":114.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/132009_xl.jpg?v=1789759232"},{"product_id":"lamello-minicol-glue-dispenser","title":"Lamello Minicol Glue Dispenser","description":"\u003cp\u003eThe MINICOL glue dispenser consists of a non-slip base and a glue bottle with a nozzle specifically shaped to fit the groove. After use the bottle is put back into the base which seals the nozzle, preventing blockage and drying out of the glue.\u003c\/p\u003e\u003cp\u003eDesigned to dispense the glue into the side of the groove with no mess, helping ensuring a stronger hold, a Lamello glue dispenser is a very useful accessory for any biscuit jointer.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54115967697243,"sku":"600497","price":41.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/600497_xl.jpg?v=1789759247"},{"product_id":"lamello-biscuit-jointer-blade","title":"Lamello Biscuit Jointer Blade","description":"\u003cp\u003eThis Lamello tungsten tipped blade is a top of the range industrial quality blade for trade or professional use. Cuts 4mm slot for biscuits and other connectors. Diameter 100mm bore 22mm. (Fits Lamello; Classic C3, TOP20\/21 and Zeta as well as many other makes of biscuit jointer)\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54116502667611,"sku":"132000","price":84.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/132000_xl.jpg?v=1789760296"},{"product_id":"lamello-clamex-hw-blade","title":"Lamello Clamex HW Blade","description":"\u003cp\u003eFor use with Classic X and TOP 21 Jointers, cuts 8mm groove for S18 connectors.  100mm diameter blade with reversible HW (Tungsten) blades that are also replaceable.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54116531700059,"sku":"702314","price":157.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/702314_xl.jpg?v=1789760820"},{"product_id":"lamello-blade-for-c3-biscuit-jointer","title":"Lamello Blade for C3 Biscuit Jointer","description":"\u003cp\u003eReplacement Blade for C3 Biscuit Jointer.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54116705403227,"sku":"100909","price":40.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/100909_xl.jpg?v=1789762746"},{"product_id":"axcaliber-biscuit-jointer-blade","title":"Axcaliber Biscuit Jointer Blade","description":"\u003cp\u003eThis Axcaliber biscuit jointing blade is 100mm in diameter has 8 tungsten carbide teeth to produce an accurate biscuit slot. With a 22mm bore, this will fit almost all known biscuit jointers. A high quality blade for trade or professional use.\u003c\/p\u003e","brand":"Axcaliber","offers":[{"title":"Default Title","offer_id":54117317017947,"sku":"951585","price":15.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/951585_xl.jpg?v=1789764958"},{"product_id":"lamello-zeta-jointer-blade","title":"Lamello Zeta Jointer Blade","description":"\u003cp\u003eBlade for the Lamello Zeta jointer, tungsten carbide tipped groove cutter, 100mm x 7mm x 22mm bore.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54117459984731,"sku":"952761","price":94.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/952761_xl.jpg?v=1789766339"},{"product_id":"lamello-p-system-arbor-for-cnc-blades","title":"Lamello P-System Arbor for CNC Blades","description":"\u003cp\u003e20 x 50mm arbor to fit the Lamello P-System CNC blade for use with CNC machinery. DTK48.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54117862506843,"sku":"503705","price":190.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/503705_xl.jpg?v=1789769525"},{"product_id":"lamello-diamond-tipped-blade-for-zeta","title":"Lamello Diamond Tipped Blade For Zeta","description":"\u003cp\u003eLong lasting P-System groove cutter for the Lamello Zeta jointer. 100.4 x 7 x 22 mm.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54117909234011,"sku":"506242","price":166.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/506242_xl.jpg?v=1789769791"},{"product_id":"festool-domino-df-500-corner-connector-kv-d8-50-pkt-50","title":"Festool DOMINO DF 500 Corner Connector KV D8\/50 (Pkt 50)","description":"\u003cp\u003eThe DOMINO D8\/50 connector locks together furniture corner joints or ‘L’ panel joints. It is suitable for materials with a thickness between 18mm and 28mm. The joints are easy to assemble, disassemble and reassemble being strong, tight and unobtrusive.\u003c\/p\u003e\u003cp\u003eWith the DOMINO DF 500 jointer and BS-KV D15 jig you can produce highly accurate and strong knockdown joinery simply and quickly. Machining is precise and quick, the system offers increased flexibility, design potential and savings in time. Supplied as a pack of 50 connectors.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":54118305497435,"sku":"104728","price":108.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/104728_xl.jpg?v=1789774625"},{"product_id":"festool-domino-df-500-corner-connector-kv-lr32-d8-50","title":"Festool DOMINO DF 500 Corner Connector KV-LR32 D8\/50","description":"\u003cp\u003eThe DOMINO KV-LR 32 D8\/50 connector locks together furniture mid-panel joints or ‘T’ panel joints. It is suitable for materials with a thickness between 18mm and 28mm. The male half locates in a 5mm hole or the pre-drilled holes of the 32mm cabinet system. The female half fits into a hole made by your DOMINO DF 500 jointer and BS-KV D15 jig.\u003c\/p\u003e\u003cp\u003eThe joints are easy to assemble, disassemble and reassemble being strong, tight and unobtrusive. The system allows you to produce highly accurate and strong knockdown joinery simply and quickly. Machining is precise and quick, the system offers increased flexibility, design potential and savings in time. Supplied as a pack of 50 connectors.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":54118305628507,"sku":"104729","price":85.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/104729_xl.jpg?v=1789774633"},{"product_id":"festool-domino-df-500-connector-drilling-jig-bs-kv-d15","title":"Festool DOMINO DF 500 Connector Drilling Jig BS- KV D15","description":"\u003cp\u003eThe Festool drilling jig BS-KV D15 precisely positions the D15 cutter used to bore the access hole for tightening the Festool DOMINO D8 panel and furniture connectors. The jig has a tongue, which locates in a previously made DOMINO hole for the connector. The jig is adjustable for different thicknesses of board from 18mm to 28mm.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":54118305694043,"sku":"104732","price":70.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/104732_xl.jpg?v=1789774642"},{"product_id":"festool-domino-df-500-connector-drill-bit-kvb-hw-d15-ce","title":"Festool DOMINO DF 500 Connector Drill Bit KVB-HW D15 CE","description":"\u003cp\u003eUsed with the Festool drilling template BS-KV D15 (Festool no. 203164), this drill bit bores a 15mm vertical hole. A stop collar ensures the hole is always the correct depth. The hole allows access to the locking screw of the DOMINO D8 connectors. The drill bit features a CENTROTEC shaft for secure connection in a CENTROTEC holder or drill chuck.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":54118306513243,"sku":"104733","price":51.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/104733_xl.jpg?v=1789774709"},{"product_id":"lamello-tenso-p-10-connector-pre-load-clip","title":"Lamello Tenso P-10 Connector \u0026 Pre-load Clip","description":"\u003cp\u003eTenso P-10 has an installation depth of only 10mm, so you can take advantage of the system using thinner material.\u003c\/p\u003e\u003cp\u003eThe self-locking Tenso P is a two-part concealed connector that forms strong connections in an instant without the need for tools. Tenso P greatly speeds up the assembly process. Its unique design offers numerous benefits, flexibility, speed and simplicity in design, production, transport and assembly.\u003c\/p\u003e\u003cp\u003eIn effect, the Tenso P is an invisible, internal clamp that firmly pulls each part together whilst the glue dries. The Tenso P removes the need for clamps. Tenso P joints are mechanically locked and tight. Once assembled the connectors are invisible with no indication of their existence.\u003c\/p\u003e\u003cp\u003eTenso joints allow you to snap sections of furniture together in the workshop and then carry out other operations on the piece without clamps getting in the way.\u003c\/p\u003e\u003cp\u003eYou can glue sub-assemblies together then proceed with final assembly without waiting for the glue to cure.\u003c\/p\u003e\u003cp\u003eUsing the Pre-load clips considerably reduce the amount of force required when connecting the workpieces, without any loss of clamping power. Pre-load clips speed up assembly and allow the use of the Tenso P in a greater variety of joints.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80","offer_id":54118334431579,"sku":"105748","price":69.15,"currency_code":"GBP","in_stock":true},{"title":"300","offer_id":54118334464347,"sku":"105749","price":233.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/105748_xl.jpg?v=1789776116"},{"product_id":"lamello-tenso-pre-load-tool-for-p-14-p-10","title":"Lamello Tenso Pre-load Tool For P-14 \u0026 P-10","description":"\u003cp\u003eThe pre-load insertion tool aids in the correct placing of the Tenso pre-load clips into the Tenso connector. It fits both the P-14 and P-10 size pre-load clips. The Tenso’s high clamping force is one of its main features, resulting in a firm joint. However, when using several connectors at a time, considerable force is required to make the final connection. The pre-load clips lower the amount of force required to make the connection without lessening the final clamping power.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118334562651,"sku":"105750","price":5.48,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/105750_xl.jpg?v=1789776124"},{"product_id":"lamello-p-system-professional-connector-assortment-in-sortainer-case","title":"Lamello P-System Professional Connector Assortment In Sortainer Case","description":"\u003cp\u003eThis 3-drawer Sortainer case contains a variety of Lamello’s Clamex, Tenso, Bisco and Divario fittings. In addition, it includes the necessary jigs and installation tools.\u003c\/p\u003e\u003cp\u003eThe contents are more than enough to cover many projects. The Sortainer keeps everything organised and immediately accessible.  It is easy to see if you are running low on a particular item and stock up accordingly.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118369984859,"sku":"106156","price":563.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106156_xl.jpg?v=1789776976"},{"product_id":"lamello-cabineo-8-m6-panel-connector-starter-kit","title":"Lamello Cabineo 8 M6 Panel Connector Starter Kit","description":"\u003cp\u003eThe Cabineo starter set Includes 80 x Cabineo 8 M6 connectors, 40 x white cover caps, 40 x  insert nuts, 1 x installation tool and 1 x Cabineo 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e hex driver bit.\u003c\/p\u003e\u003cp\u003eMade to withstand vigorous use, the design possibilities are endless.  Cabineo offers a discreet, fast and effective solution to join heavy-duty materials without compromise. The Cabineo 8 M6 allows you to make time and cost saving connections in a variety of materials. Connections can be made with aluminium, steel or HPL materials, as well as timber and man-made boards. The Cabineo 8 M6 boasts the same impressive credentials as the existing Cabineo family. The one-piece connector is quick and easy to install into a drilled or routed shape and requires no edge drilling and has a high clamping force.\u003c\/p\u003e\u003cp\u003eInstalling the Cabineo into the workpieces during the production process is possible, as there are no protruding parts, which could damage the finished surfaces. In addition,this eliminates the need for bags of separate loose fixings. Because the elements are already factory-installed, assembly is greatly simplified and considerably faster.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118394626395,"sku":"106755","price":92.65,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106755_xl.jpg?v=1789778373"},{"product_id":"lamello-cabineo-8-m6-panel-17-25mm-insert-100","title":"Lamello Cabineo 8 M6 Panel 17-25mm Insert (100)","description":"\u003cp\u003eCabineo insert nut M6 x 15.3 for 17 to 25mm material thickness, supplied in a pack of 100.\u003c\/p\u003e\u003cp\u003eWith the Cabineo 8 M6, connections can now be created with materials like aluminium, steel or HPL. However, where the thread cannot be cut directly into the substrate, Lamello offers an insert for an even stronger joint. This insert is ideal for detachable corner and dividing panel joints and the installation of fixed shelves or vertical dividers in an already assembled unit. The insert allows easy disassembly and reassembly without loss of joint integrity.\u003c\/p\u003e\u003cp\u003eThe strength could also be further improved. The Lamello inserts are hammered into the dividing panels with a through hole, into which the Cabineo then engages from both sides. This generates an enormous clamping force.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118394724699,"sku":"106750","price":44.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106750_xl.jpg?v=1789778380"},{"product_id":"lamello-cabineo-8-m6-panel-14-16mm-insert-100","title":"Lamello Cabineo 8 M6 Panel 14-16mm Insert (100)","description":"\u003cp\u003eCabineo insert nut M6 x 12.3 for material 14 to 16mm thick, supplied in a pack of 100.\u003c\/p\u003e\u003cp\u003eWith the Cabineo 8 M6, connections can now be created with materials like aluminium, steel or HPL. However, where the thread cannot be cut directly into the substrate, Lamello offers an insert for an even stronger joint. This insert is ideal for detachable corner and dividing panel joints, and the installation of fixed shelves or vertical dividers in an already assembled unit. The insert allows easy disassembly and reassembly without loss of joint integrity.\u003c\/p\u003e\u003cp\u003eThe strength could also be further improved. The Lamello inserts are hammered into the dividing panels with a through hole, into which the Cabineo then engages from both sides. This generates an enormous clamping force.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118394757467,"sku":"106749","price":40.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106749_xl.jpg?v=1789778387"},{"product_id":"lamello-cabineo-8-m6-panel-connectors","title":"Lamello Cabineo 8 M6 Panel Connectors","description":"\u003cp\u003eCabineo is a one-piece connector, designed to join cabinet panels and other panel furniture elements. The Cabineo connector offers many advantages in the manufacture of cabinets. Its design means it can be machined on all CNC machines, including 3-axis machines, nesting machines and CNC routers.\u003c\/p\u003e\u003cp\u003eThe Cabineo connector fits into a drilled or routed recess, which is machined solely from the surface. The machining process saves a great deal of time as there is no additional edge drilling required. Compared with a cam and dowel, the Cabineo connector offers more efficient machining and faster assembly. The body of the Cabineo connector is a glass-fibre reinforced moulding; it is simply tapped into its recess.\u003c\/p\u003e\u003cp\u003ePre-installing the connectors does away with the need to pick and ship a separate bag of fixings. Cabinets can be shipped flat-packed complete with connectors, simplifying final assembly.\u003c\/p\u003e\u003cp\u003eCabineo 8 M6 offers all the existing advantages of the Cabineo, such as the surface machining, flat-pack delivery and quick assembly. In addition, Cabineo 8 M6 offers more application possibilities.\u003c\/p\u003e\u003cp\u003eCabineo 8 M6, allows you to create connections in materials like aluminium, steel or HPL. Where the thread cannot be cut directly into the substrate, Lamello offers an insert for an even stronger joint. This insert is ideal for detachable corner and dividing panel joints with a heavy load. Ideal for high quality removable furniture, modular parts or trade fair construction.\u003c\/p\u003e\u003cp\u003eThe strength can be further improved. The Lamello inserts are hammered into the dividing panels with a through hole, into which the Cabineo then engages from both sides. This generates an enormous clamping force. Another plus point is the simplified assembly; whether this is a corner connection or a dividing panel joint, the Cabineo 8 is always used with the corresponding insert nut (Cabineo insert nut M6x12.3 for 16mm material thickness and Cabineo insert nut M6x15.3 for 19mm material thickness).\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Black","offer_id":54118396166491,"sku":"106748","price":149.02,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":54118396199259,"sku":"106752","price":149.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106752_xl.jpg?v=1789778461"},{"product_id":"lamello-clamex-p-14-flexus-connector","title":"Lamello Clamex P-14 Flexus Connector","description":"\u003cp\u003eThe Lamello Flexus P-14 connectors feature flexible locating pins in place of the rigid locating pins found on the Lamello Clamex P-14. This flexibility allows panels to be brought together at an angle. The ability to bring panels together in this way opens up a whole new range of possibilities and assembly sequences. The flexible locating pins act in exactly the same way, keeping the workpiece in position and in all other respects the Flexus P-14 offers all the advantages of the Clamex P-14. Once installed it is almost totally invisible, only a single 6mm hole shows.  A T-slot is cut using a Lamello Zeta P2 biscuit jointer. The Flexus P-14 has the matching ‘T’ shaped profile and slides into place, no screws or glue are needed. A pivot lever locks the two halves together. The lever is locked using a hexagon key though the 6mm hole forming a very secure joint. Made from fibreglass reinforced plastic with a zinc die-cast lever for strength (tensile fitting strength 1000N = 100kg). Minimum thickness 12mm. Overall size 64 x 13.5 x 9.7mm \/ 57 x 7.5 x 9.7mm. This unique fitting overcomes many design problems.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80","offer_id":54118418547035,"sku":"107470","price":96.4,"currency_code":"GBP","in_stock":true},{"title":"300","offer_id":54118418579803,"sku":"107471","price":340.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/107470_xl.jpg?v=1789779152"},{"product_id":"veritas-domino-joinery-table","title":"Veritas Domino Joinery Table","description":"\u003cp\u003eThe Veritas Domino Joinery Table effectively turns your Festool DF 500 Domino into a fixed morticer. Rather than taking the Domino to the work, the table enables you to bring the work to the tool. This gives you a major advantage especially when working with smaller pieces. The table’s fences form a reference for the work allowing you to make repeatable and accurate placement of Domino mortices. The Veritas Domino Joinery Table ensures that the mortice is placed precisely in both sides of the joint for a perfect result every time. The table’s clamping options secure the workpiece in place while making the mortice with the Domino.\u003c\/p\u003e\u003cp\u003eThe Baltic birch laminated top is 800mm x 800mm overall (working area 800mm × 590mm) and mounted on a 100mm high base unit. The base unit has cutouts for clamping to a bench top. Your Domino mounts in the gap between the aluminium fixed fences. The table features four keyhole slots running parallel to the fixed fence for the hold-downs. The moveable guide fence accurately locates the workpiece at 90\u003cspecial id=\"8\"\u003e\u003c\/special\u003e or 45\u003cspecial id=\"8\"\u003e\u003c\/special\u003e in relation to the fixed fence. The offset registration gauge allows the guide fence to be flipped for precise alignment of the mortises, ensuring a seamless joint. Custom made guide fences can be used for any other required angle.\u003c\/p\u003e\u003cp\u003eTwo 6mm shims are included for centering the mortice in the edge of standard 19mm(3\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e) or 18mm material. An optional set of shims (two each of 2mm, 4mm and 8mm) is available separately and can be used alone or in combination to create vertical offsets to meet most project requirements.\u003c\/p\u003e\u003cp\u003eIncludes 2 x aluminium fixed fences, a 90\/45 guide fence, 2 x 6mm thick shims, offset gauge, 2 x hold-downs, 2 x brass knobs and assembly hardware.\u003c\/p\u003e\u003cp\u003eSome self assembly required (Festool Domino Jointer DF 500 not included).\u003c\/p\u003e\u003cp\u003eMade in Canada.\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":54118483231067,"sku":"109386","price":254.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109386_xl.jpg?v=1789782001"},{"product_id":"lamello-p-system-accessory-set-in-sys-3","title":"Lamello P-System Accessory Set in SYS 3","description":"\u003cp\u003eContained within a Systainer T-Loc carry case is a great assortment of Lamello’s Zeta P2 most popular P-System connectors including Clamex, Tenso and Bisco. The contents are more than enough to cover many projects. The Systainer features internal dividers to keep the various elements separate and immediately accessible. It is easy to see if you are running low on a particular item and stock-up accordingly.\u003c\/p\u003e\u003cp\u003eThe Accessory Set comprises:\u003c\/p\u003e\u003cp\u003e80 pairs of  Clamex P-14\u003c\/p\u003e\u003cp\u003e80 pairs Tenso P-14 including Clips\u003c\/p\u003e\u003cp\u003e60 pairs of  Clamex P-14\/10 Medius\u003c\/p\u003e\u003cp\u003e20 pieces of Bisco P 14\u003c\/p\u003e\u003cp\u003ePlus a Tenso P-14\/10 preload tool\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118491029851,"sku":"109546","price":283.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109546_xl.jpg?v=1789782366"},{"product_id":"lamello-clamex-s-20-connector-kit","title":"Lamello Clamex S-20 Connector Kit","description":"\u003cp\u003eAlmost invisible, the Clamex S-20 connector creates strong joints at varying angles, without the need for adhesive and clamps in the panel joints. Detachable and permanent, the joint just has a small 6mm hole visible to operate the level clamp. Cabinet makers, joiners, carpenters, interior fitters, shop and exhibition fitters and people in the furniture industry would all benefit from using the Clamex S-20.\u003c\/p\u003e\u003cp\u003eUsing a standard biscuit jointer blade, a 4mm slot is cut for the connector, with a 6mm hole then drilled to access the lever. Screw the connector into the joint, align the parts together and tighten – it’s that simple.\u003c\/p\u003e\u003cp\u003eBeing 4mm in thickness, the connector is suitable for narrow materials and allows installation into the edge of materials from 16mm thickness. The strong connector is detachable and can be taken apart numerous times without noticeable wear. When on site, there is minimal assembly time with full prefabrication possible. It is stackable with no protruding parts on the surface and is easy and efficient to install. There are no additional positioning parts such as dowels or tongues required. Tolerance lateral ± 0,1 mm (max.± 0 mm).\u003c\/p\u003e\u003cp\u003eMade of fibreglass reinforced plastic with a zinc die-cast allow lever. Size 59 x 12 x 3.9mm. Screw size 3 x 12mm. (Screw pre-drilling may be required in some materials such as chipboard).\u003c\/p\u003e\u003cp\u003eAvailable in packs of 20 pairs or 80 pairs including screws, Clamex S-20 drill and alignment jig and TX10 torx bit with 1\/4\u003cspecial id=\"32\"\u003e\u003c\/special\u003e hex drive. (Note: 6mm drill bit not supplied).\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"20","offer_id":54118498337115,"sku":"109874","price":38.15,"currency_code":"GBP","in_stock":false},{"title":"80","offer_id":54118498369883,"sku":"109875","price":94.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109874_xl.jpg?v=1789782736"},{"product_id":"lamello-clamex-s-20-connector-starter-kit-pack-80","title":"Lamello Clamex S-20 Connector Starter Kit Pack 80","description":"\u003cp\u003eAlmost invisible, the Clamex S-20 connector creates strong joints at varying angles, without the need for adhesive and clamps in the panel joints. Detachable and permanent, the joint just has a small 6mm hole visible to operate the level clamp. Cabinet makers, joiners, carpenters, interior fitters, shop and exhibition fitters and people in the furniture industry would all benefit from using the Clamex S-20.\u003c\/p\u003e\u003cp\u003eUsing a standard biscuit jointer blade, a 4mm slot is cut for the connector, with a 6mm hole then drilled to access the lever. Screw the connector into the joint, align the parts together and tighten - it's that simple.\u003c\/p\u003e\u003cp\u003eBeing 4mm in thickness, the connector is suitable for narrow materials and allows installation into the edge of materials from 16mm thickness. The strong connector is detachable and can be taken apart numerous times without noticeable wear. When on site, there is minimal assembly time with full prefabrication possible. It is stackable with no protruding parts on the surface and is easy and efficient to install. There are no additional positioning parts such as dowels and tongues required. Tolerance lateral ± 0,1 mm (max.± 0 mm).\u003c\/p\u003e\u003cp\u003eMade of fibreglass reinforced plastic with a zinc die-cast allow lever. Size 59 x 12 x 3.9mm. Screw size 3 x 12mm. (Screw pre-drilling may be required in some materials such as chipboard).\u003c\/p\u003e\u003cp\u003eThis starter set includes 80 pairs of Clamex S-20 connectors including screws, Clamex S-20 drill jig with the 6mm brad point drill bit, Clamex S-20 drill and alignment jig and installation screwdriver, contained in a systainer storage case.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118498566491,"sku":"109876","price":262.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109876_xl.jpg?v=1789782745"},{"product_id":"lamello-s-20-drill-alignment-jig","title":"Lamello S-20 Drill \u0026 Alignment Jig","description":"\u003cp\u003eThis drill jig is an alignment tool for the Clamex S-20 connectors, that can be applied on both the inner and outer sides of a workpiece. It allows for the drilling of 6mm holes that are required to lock the mechanism in place and allows for precise placement of the connector. Working especially well on 90 and 45 degree angles, this drill jig is in a fixed position. (Note: the jig is supplied with no drill bit and no S-20 connectors).\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118498926939,"sku":"109898","price":9.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/109898_xl.jpg?v=1789782802"},{"product_id":"lamello-zeta-5mm-positioning-pins-pkt-2","title":"Lamello Zeta 5mm Positioning Pins (Pkt 2)","description":"\u003cp\u003eThese Lamello Zeta 5mm positioning pins are for use alongside the Lamello Zeta P2 Biscuit Jointer, to accurately cut P-System grooves that are required in the middle of a surface. Using a CNC machine, drill two 5mm holes spaced at 101mm apart, and insert the pins. Finish the cut by inserting the Lamello Zeta into the drilled holes to achieve precise alignment.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118503350619,"sku":"110839","price":13.32,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/110839_xl.jpg?v=1789783297"},{"product_id":"lamello-extraction-stub-for-zeta-classic-x-top21","title":"Lamello Extraction Stub for Zeta, Classic X, TOP21","description":"\u003cp\u003eThis Lamello Extraction Stub connects the hose to the Lamello Zeta, Classic X and Top 21 machines. It is used as an adaptor to remove excess wood chips and debris away from the cutting area.\u003c\/p\u003e\u003cp\u003eThe extraction stub is 90\u003cspecial id=\"8\"\u003e\u003c\/special\u003e and 23mm.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118503448923,"sku":"110840","price":6.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/110840_xl.jpg?v=1789783305"},{"product_id":"lamello-extraction-stub-36mm-festool-compatible","title":"Lamello Extraction Stub 36mm Festool Compatible","description":"\u003cp\u003eThis Lamello Extraction Stub connects the hose to the Classix X, Top 21 and Zeta biscuit jointer machines. It is used as an adaptor to remove excess wood chip and debris away from the cutting area.\u003c\/p\u003e\u003cp\u003eThe extraction stub is 36mm and also compatible with Festool biscuit jointer machines.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118508429659,"sku":"611078","price":13.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/611078_xl.jpg?v=1789783739"},{"product_id":"lamello-cabineo-x-connectors","title":"Lamello Cabineo X Connectors","description":"\u003cp\u003eCabineo X is a one piece connector, designed to joint cabinet panels for applications such as making corner connections, dividing wall connections, fixed\/adjustable shelves, bookshelves and more due to its high clamping force. Its design means it can be machined on all CNC machines, with no edge drilling and can be pressed into material with a minimum of 12mm thickness. Cabineo X can be used with a variety of material types including chipboard, MDF, plywood, hard\/soft woods and more.\u003c\/p\u003e\u003cp\u003eThe Cabineo X connector fits into a drilled or routed recess, which is machined solely from the surface. No edge drilling is required. Compared with a cam and dowel, the Cabineo X connector offers more efficient machining and faster assembly. Its open, multifunctional housing ensures you can use the connector with the varying Cabineo screws or shelf pins. Insert a Cabineo screw from the top and screw into the counterpart using the hexagon bit. This means it is possible to lay your shelves\/cabinet tops onto the screw or shelf pin for simplified assembly.\u003c\/p\u003e\u003cp\u003eWhen using with screws, the Cabineo X is perfect for easy installation of shelves that are already joined into cabinets, or for when assembling corner joints. Plus, combined with shelf supports, the Cabineo X prevents shelves from being pulled out or lifted off, ideal for open shelving or for caravans and shipbuilding.\u003c\/p\u003e\u003cp\u003eThe Cabineo X connectors are compatible with all Cabineo products including cover caps, tools, accessories and connectors. Use alongside Cabineo 8\/12mm screws or 3\/5mm shelf supports.\u003c\/p\u003e\u003cp\u003eThe body of the Cabineo X connector is made of fibreglass, reinforced plastic. Size 33.8 x 16.5 x 10.8mm. Installation tolerance: Long ± 0.5mm. Colour: White.\u003c\/p\u003e\u003cp\u003eAvailable in packs of 500 or 2,000 in the colour white.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"500","offer_id":54118512820571,"sku":"111815","price":100.32,"currency_code":"GBP","in_stock":true},{"title":"2000","offer_id":54118512853339,"sku":"111816","price":379.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/111815_xl.jpg?v=1789783987"},{"product_id":"lamello-cabineo-x-connectors-starter-set","title":"Lamello Cabineo X Connectors Starter Set","description":"\u003cp\u003eThe Cabineo X starter set includes: 80 x Cabineo X, 40 x Cabineo 12 screw, 20 x Cabineo 8 screw, 20 x Cabineo 8 M6 screw, 20 x Cabineo X shelf support 5mm, 20 x Cabineo X shelf support 3mm, 40 x white cover caps, Cabineo X screw in aid and a Cabineo hexagon bit 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e GL 80mm.\u003c\/p\u003e\u003cp\u003eCabineo X is a one piece connector, designed to joint cabinet panels for applications such as making corner connections, dividing wall connections, fixed\/adjustable shelves, bookshelves and more due to its high clamping force. Its design means it can be machined on all CNC machines, with no edge drilling and can be pressed into material with a minimum of 12mm thickness. Cabineo X can be used with a variety of material types including chipboard, MDF, plywood, hard\/soft woods and more.\u003c\/p\u003e\u003cp\u003eThe Cabineo X connector fits into a drilled or routed recess, which is machined solely from the surface. No edge drilling is required. Compared with a cam and dowel, the Cabineo X connector offers more efficient machining and faster assembly. Its open, multifunctional housing ensures you can use the connector with the varying Cabineo screws or shelf pins. Insert a Cabineo screw from the top and screw into the counterpart using the hexagon bit. This means it is possible to lay your shelves\/cabinet tops onto the screw or shelf pin for simplified assembly.\u003c\/p\u003e\u003cp\u003eWhen using with screws, the Cabineo X is perfect for easy installation of shelves that are already joined into cabinets, or for when assembling corner joints. Plus, combined with shelf supports, the Cabineo X prevents shelves from being pulled out or lifted off, ideal for open shelving or for caravans and shipbuilding.\u003c\/p\u003e\u003cp\u003eThe Cabineo X connectors are compatible with all Cabineo products including cover caps, tools, accessories and connectors.\u003c\/p\u003e\u003cp\u003eThe body of the Cabineo X connector is made of fibreglass, reinforced plastic. Size 33.8 x 16.5 x 10.8mm. Installation tolerance: Long ± 0.5mm.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118520914267,"sku":"111814","price":56.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/111814_xl.jpg?v=1789783996"},{"product_id":"lamello-cabineo-x-shelf-support-5mm-pack-500","title":"Lamello Cabineo X Shelf Support 5mm (Pack 500)","description":"\u003cp\u003eThese Cabineo X 5mm shelf supports are for use with the Cabineo X connectors. The connectors combined with these shelf supports, prevent shelves from being pull out or lifted off, making them perfect for open shelving or caravans\/shipbuilding. Simply push down on the shelf and the supports will click into the connectors.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118521110875,"sku":"111819","price":73.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/111819_xl.jpg?v=1789784004"},{"product_id":"lamello-cabineo-x-screw-in-aid-for-hex-bit","title":"Lamello Cabineo X Screw in Aid for Hex Bit","description":"\u003cp\u003eFor use with the Cabineo X connectors, these screw-in aids are suitable for the Cabineo hexagonal bit 1\/4\u003cspecial id=\"32\"\u003e\u003c\/special\u003e GL 80mm. Use this aid to help guide the screw into the counterpart with ease.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118521209179,"sku":"111820","price":2.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/111820_xl.jpg?v=1789784011"},{"product_id":"lamello-cabineo-x-12-screw-pack-500","title":"Lamello Cabineo X 12 Screw (Pack 500)","description":"\u003cp\u003eThese Lamello Cabineo X 12 Screws are designed for use with the Lamello Cabineo X connectors and create strong, reliable joints. With a high clamping force, they are suitable for making corner joints where the counterpart is a minimum of 13mm in thickness, or for making dividing panel joints where the counterpart material is a minimum of 24mm in thickness. Insert into the open housed Lamello Cabineo X connectors and screw into the material.\u003c\/p\u003e\u003cp\u003eSuitable for a variety of materials including chipboard, MDF, plywood, soft and hard woods.\u003c\/p\u003e\u003cp\u003eIncludes 500 x Cabineo X 12 Screws, 1 x Cabineo X Screw in aid and 1 x Cabineo hexagon bit 1\/4\u003cspecial id=\"32\"\u003e\u003c\/special\u003e GL 80mm.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118521340251,"sku":"111817","price":49.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/111817_xl.jpg?v=1789784018"},{"product_id":"lamello-cabineo-x-8-m6-screw-pack-500","title":"Lamello Cabineo X 8 M6 Screw (Pack 500)","description":"\u003cp\u003eThese Lamello Cabineo 8 M6 Screws are designed for use with the Lamello Cabineo X connectors and create strong, reliable joints. With a high clamping force, they are suitable for corner joints where the counterpart material is a minimum of 9mm, or dividing panel joints where the counterpart material is a minimum of 16mm. Perfect for the easy installation of shelves. Insert into the open housed Lamello Cabineo X connectors and screw into the material.\u003c\/p\u003e\u003cp\u003eSuitable for a variety of materials including chipboard, MDF, plywood, soft and hard woods.\u003c\/p\u003e\u003cp\u003eIncludes 500 x Cabineo 8 M6 Screws, 1 x Cabineo X Screw in aid and 1 x Cabineo hexagon bit 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e GL 80mm.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":54118521438555,"sku":"111818","price":49.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/111818_xl.jpg?v=1789784026"}],"url":"https:\/\/www.axminstertools.com\/collections\/biscuit-jointing-blades-accessories.oembed","provider":"Axminster Tools","version":"1.0","type":"link"}