{"title":"Milling Accessories","description":"\u003ch3\u003eMilling Accessories\u003c\/h3\u003e\u003cp\u003eMilling machine accessories help improve the precision, versatility and performance of your milling machine for a wide range of machining and engineering tasks. From milling cutters and collets to workholding equipment, clamping kits and precision tooling, the right milling accessories help achieve accurate cuts, secure workpieces and deliver consistent results. Whether you're setting up a new milling machine or upgrading your existing workshop equipment, discover a range of milling accessories at Axminster Tools to support precision engineering, metalworking and machining applications.\u003c\/p\u003e","products":[{"product_id":"eml-silver-steel","title":"EML Silver Steel","description":"\u003cp\u003eCrusader Silver Steel is a high carbon bright steel, precision ground to very close tolerances. Close control of chemical analysis, particularly the chromium content, ensures optimum strength and hardenability and a consistent response to heat treatment. Crusader Silver Steel is supplied in the annealed condition and is readily machinable. All ends are individually deburred, which ensures safety during handling and protects other pieces from scratching. Silver steel pieces are individually dipped in a lanolin-based solution to guard against corrosion.\u003c\/p\u003e\u003cp\u003eLength: 330mm\u003c\/p\u003e\u003cp\u003eTolerances: under 25mm dia + 0.000 and - 0.010mm, over 25mm dia and above + 0.000 and - 0.020mm\u003c\/p\u003e\u003cp\u003eHeat Treatment: for maximum hardness (66 Rockwell C or 950 VPN) heat to 770\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC - 790\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC (1420\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF - 1450\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF). Soak until uniformly heated then quench in clean water or preferably 10% brine solution. The most satisfactory and efficient method is to heat in a salt bath and it is advisable to control the temperature carefully. The use of a pyrometer is recommended. If a muffle furnace is used, the atmosphere should be slightly reduced to minimise scaling and to avoid spots. Soak for a minimum of one hour at the following temperatures immediately after hardening:\u003c\/p\u003e\u003cp\u003e\u003cspecial id=\"22\"\u003e\u003c\/special\u003eTemperature Range Hardness\u003cspecial id=\"23\"\u003e\u003c\/special\u003e\u003c\/p\u003e\u003cp\u003e\u003cspecial id=\"14\"\u003e\u003c\/special\u003e 150\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC (302\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF) - 63\/65 RC\u003c\/p\u003e\u003cp\u003e\u003cspecial id=\"14\"\u003e\u003c\/special\u003e 200\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC (392\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF) - 60\/62 RC\u003c\/p\u003e\u003cp\u003e\u003cspecial id=\"14\"\u003e\u003c\/special\u003e 250\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC (482\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF) - 59\/61 RC\u003c\/p\u003e\u003cp\u003e\u003cspecial id=\"14\"\u003e\u003c\/special\u003e 300\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC (572\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF) - 55\/57 RC\u003c\/p\u003e\u003cp\u003eAnnealing: heat to 760\u003cspecial id=\"8\"\u003e\u003c\/special\u003e - 780\u003cspecial id=\"8\"\u003e\u003c\/special\u003eC (1400\u003cspecial id=\"8\"\u003e\u003c\/special\u003e - 1470\u003cspecial id=\"8\"\u003e\u003c\/special\u003eF). Soak for one hour per 25mm of section and cool slowly in the furnace.\u003c\/p\u003e","brand":"EML","offers":[{"title":"3 mm","offer_id":54115803234651,"sku":"117054","price":0.9,"currency_code":"GBP","in_stock":true},{"title":"4 mm","offer_id":54115803267419,"sku":"117056","price":1.28,"currency_code":"GBP","in_stock":true},{"title":"6 mm","offer_id":54115803300187,"sku":"117064","price":2.4,"currency_code":"GBP","in_stock":true},{"title":"8 mm","offer_id":54115803332955,"sku":"117066","price":3.26,"currency_code":"GBP","in_stock":true},{"title":"10 mm","offer_id":54115803365723,"sku":"117068","price":5.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/117054_xl.jpg?v=1789756838"},{"product_id":"axminster-engineer-series-3-way-unigrip-vertical-horizontal-drill-vice","title":"Axminster Engineer Series 3-Way Unigrip Vertical\/Horizontal Drill Vice","description":"\u003cp\u003eA three position drilling vice with ground faces and slideways for accurate and precise operation. The jaws have triangular grooves for gripping circular items, both horizontally and vertically, and there are recesses in the tops of the jaws for gripping smaller items. In order to save space on the drill table the handle is held captive in the frame and the lead screw retracts into it as the jaws are opened. The vice has three machined mounting faces, each equipped with clamping slots or holes, which allow holes to be drilled at right angles to each other without the need to re-position the work.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"75 mm","offer_id":54115928637787,"sku":"210339","price":30.48,"currency_code":"GBP","in_stock":false},{"title":"125 mm","offer_id":54115928670555,"sku":"210340","price":49.82,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":54115928703323,"sku":"910201","price":38.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910201_xl.jpg?v=1789758641"},{"product_id":"axminster-engineer-series-er20-precision-collets","title":"Axminster Engineer Series ER20 Precision Collets","description":"\u003cp\u003eThese end mill collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that fewer collets need to be stocked, making them a more economical proposition when compared to other collet-based systems. Collet nuts are available separately, ideal for customers wishing to make their own holding devices or spindles. ER20 collet holders have M10 threads.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"8.0 mm - 7.0 mm","offer_id":54115929063771,"sku":"910210","price":6.15,"currency_code":"GBP","in_stock":false},{"title":"12.0 mm - 11.0 mm","offer_id":54115929096539,"sku":"910214","price":6.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910210_xl.jpg?v=1789758650"},{"product_id":"axminster-engineer-series-er25-precision-collets","title":"Axminster Engineer Series ER25 Precision Collets","description":"\u003cp\u003eThese end mill collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that fewer collets need to be stocked, making them a more economical proposition when compared to other collet-based systems. An additional benefit is that there is no requirement for a separate imperial listing; a 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e end mill, for example, will fit into the 7.00mm to 6.00mm collet. Collet nuts are available separately, ideal for customers wishing to make their own holding devices or spindles. ER25 collet holders have M10 threads.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"3.0 mm - 2.0 mm","offer_id":54115929162075,"sku":"910217","price":2.42,"currency_code":"GBP","in_stock":true},{"title":"5.0 mm - 4.0 mm","offer_id":54115929194843,"sku":"910219","price":2.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910217_xl.jpg?v=1789758659"},{"product_id":"axminster-woodturning-er20-collets-for-junior-chuck","title":"Axminster Woodturning ER20 Collets for Junior Chuck","description":"\u003cp\u003eThe Junior chuck is supplied with 7-6mm, 11-10mm and 13-12mm collets; additional collets are also available. Please note: these collets will also fit the Axminster deluxe pen mandrel and the Axminster router collet extension.\u003c\/p\u003e\u003cp\u003eThese ER20 collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that fewer collets need to be stocked, making them a more economical proposition when compared to other collet-based systems. An additional benefit is that there is no requirement for a separate imperial listing; a 1\/4\u003cspecial id=\"32\"\u003e\u003c\/special\u003e end mill, for example, will fit into the 7.00mm to 6.00mm collet. Collet nuts are available separately, ideal for customers wishing to make their own holding devices or spindles.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"7.0 mm - 6.0 mm","offer_id":54115934404955,"sku":"910209","price":9.57,"currency_code":"GBP","in_stock":true},{"title":"13.0 mm - 12.0 mm","offer_id":54115934437723,"sku":"910215","price":5.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910215_xl.jpg?v=1789758912"},{"product_id":"axminster-engineer-series-50mm-boring-head","title":"Axminster Engineer Series 50mm Boring Head","description":"\u003cp\u003eThis precision boring head is the perfect tool for boring out very accurate holes on a vertical mill or indeed a lathe. The combination of five different sized boring bars and three mounting holes gives a wide range of boring capacities; for example a bar mounted in the central hole will bore from 9mm diameter upwards by 38mm long, whilst a bar in the side hole will bore up to 100mm diameter by about 60mm deep. The movable part of the head can be adjusted down to 0.0005\u003cspecial id=\"1\"\u003e\u003c\/special\u003e (0.0127mm) with the aid of the calibrated adjusting screw and a hexagon key. Two mounting arbors are supplied, 2MT and 3MT, both with 3\/8\u003cspecial id=\"1\"\u003e\u003c\/special\u003e Whitworth drawbar threads. Very useful and excellent value for money. Takes 1\/2\u003cspecial id=\"1\"\u003e\u003c\/special\u003e shank tools.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54115939942747,"sku":"100060","price":66.48,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/100060_xl.jpg?v=1789759031"},{"product_id":"axminster-drill-vices","title":"Axminster Drill Vices","description":"\u003cp\u003eManufactured from high grade cast iron and equipped with long mounting slots for easy adjustment on the machine table. Fixed jaw has horizontal and vertical V slots for holding round material and both jaws have a seat for retaining flat and low height workpieces. Base fixing widths: 80, 100 and 135mm. Maximum clamping capacities for each vice are 61mm, 84mm and 86mm respectively.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"63 mm","offer_id":54115982049627,"sku":"220032","price":18.73,"currency_code":"GBP","in_stock":false},{"title":"80 mm","offer_id":54115982082395,"sku":"220033","price":21.48,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":54115982115163,"sku":"220034","price":33.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/220032_xl.jpg?v=1789759311"},{"product_id":"axminster-engineer-series-super-precision-machine-vices","title":"Axminster Engineer Series Super Precision Machine Vices","description":"\u003cp\u003eHigh quality, precision machine vices for use on drill presses, mills and other similar machines. Bodies are made from close grained high tensile seasoned cast iron and have a scratch and rust resistant finish. The jaws, made from steel hardened to 55+\/-3 HRC and ground with a parallelism of 0.0012\u003cspecial id=\"32\"\u003e\u003c\/special\u003e (30 microns), hold the workpiece dead square for perfect results. The vice bodies rotate horizontally 360\u003cspecial id=\"8\"\u003e\u003c\/special\u003e against a scale and can be locked securely in the set position. There are two slots for securing the vice to the machine table. Bodies are de-mountable from the circular bases. Available in two jaw sizes - 50mm wide by 25mm deep with 50mm opening and 75mm wide by 33mm deep with 75mm opening. Precision work holding and absolutely superb!\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"50 mm","offer_id":54116001284443,"sku":"220094","price":67.82,"currency_code":"GBP","in_stock":true},{"title":"75 mm","offer_id":54116001317211,"sku":"951565","price":105.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/951565_xl.jpg?v=1789759338"},{"product_id":"axminster-model-engineer-series-sc2-clamp-kit","title":"Axminster Model Engineer Series SC2 Clamp Kit","description":"\u003cp\u003eA clamp kit for use with the Axminster SC2 faceplate accessory.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116394926427,"sku":"600554","price":14.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/600554_xl.jpg?v=1789759980"},{"product_id":"axminster-engineer-series-sx2-7-mill-floor-stand","title":"Axminster Engineer Series SX2.7 Mill Floor Stand","description":"\u003cp\u003eA sturdy sheet steel floor stand, supplied with an oil drip tray and a lockable storage area. This is supplied flat packed so assembly is required. The dimensions are 520 x 580 x 870mm.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116501750107,"sku":"600859","price":342.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/600859_xl.jpg?v=1789760270"},{"product_id":"axminster-engineer-series-sc4-clamp-kit","title":"Axminster Engineer Series SC4 Clamp Kit","description":"\u003cp\u003eClamp Kit for the Axminster SC4 faceplate. Holds the work securely in place. Can be used on any faceplate that can accommodate 12mm bolts.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116528882011,"sku":"600863","price":19.07,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/600863_xl.jpg?v=1789760736"},{"product_id":"proxxon-ms-4-machine-vice","title":"PROXXON MS 4 Machine Vice","description":"\u003cp\u003eThe MS 4 Machine Vice is made of die-cast zinc with three machined sides and horizontal \u0026amp; vertical V-slots in the jaws. The slot fits the PROXXON MB 200 and MB140\/S Drill Stands and TBM 220 Bench Drill. The vice has a jaw width of 50mm and height of 10mm. Maximum clamping width 34mm. To read a review written by Ian Wilkie, please go to 'Downloads'\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":54116548411739,"sku":"486352","price":16.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/486352_xl.jpg?v=1789761426"},{"product_id":"axminster-engineer-series-12-piece-er20-precision-collet-set","title":"Axminster Engineer Series 12 Piece ER20 Precision Collet Set","description":"\u003cp\u003eThese end mill collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that fewer collets need to be stocked, making them a more economical proposition when compared to other collet-based systems. An additional benefit is that there is no requirement for a separate imperial listing; a 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e end mill, for example, will fit into the 7mm to 6mm collet. Collet nuts are available separately, ideal for customers wishing to make their own holding devices or spindles. ER20 collet holders have M10 threads. Set of 12 comprises - 1 to 13mm.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116742463835,"sku":"910204","price":83.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910204_xl.jpg?v=1789762938"},{"product_id":"axminster-engineer-series-er20-precision-collet-holder-2mt","title":"Axminster Engineer Series ER20 Precision Collet Holder - 2MT","description":"\u003cp\u003eThe ER20 precision collet holder has a 2MT shank with an M10 thread for a draw bar.\u003c\/p\u003e\u003cp\u003eER collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that you need fewer collets compared to other collet-based systems. An additional benefit is that there is no requirement for a separate imperial listing; a 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e end mill, for example, will fit into the 7mm to 6mm collet.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116746461531,"sku":"910250","price":22.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910250_xl.jpg?v=1789762946"},{"product_id":"axminster-engineer-series-er25-precision-collet-nut","title":"Axminster Engineer Series ER25 Precision Collet Nut","description":"\u003cp\u003eER25 precision collet nut.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116750393691,"sku":"910255","price":5.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910255_xl.jpg?v=1789762956"},{"product_id":"axminster-engineer-series-17-piece-er32-precision-collet-set","title":"Axminster Engineer Series 17 Piece ER32 Precision Collet Set","description":"\u003cp\u003eThese end mill collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that fewer collets need to be stocked, making them a more economical proposition when compared to other collet-based systems. An additional benefit is that there is no requirement for a separate imperial listing; a 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e end mill, for example, will fit into the 7.00mm to 6.00mm collet. Collet nuts are available separately, ideal for customers wishing to make their own holding devices or spindles. ER32 collet holders have M12 threads. Set of 17 comprises - 3 to 19mm.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116753113435,"sku":"910232","price":124.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910232_xl.jpg?v=1789762963"},{"product_id":"axminster-engineer-series-er32-precision-collet-holder","title":"Axminster Engineer Series ER32 Precision Collet Holder","description":"\u003cp\u003eER32 precision collet holders. 3 morse taper with a 12mm draw bar thread.\u003c\/p\u003e\u003cp\u003eER collets have the unique ability to grip over a diameter range of 1mm without any loss of accuracy. This flexibility means that you need fewer collets compared to other collet-based systems. An additional benefit is that there is no requirement for a separate imperial listing; a 1\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e end mill, for example, will fit into the 7mm to 6mm collet.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116756455771,"sku":"910252","price":23.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910252_xl.jpg?v=1789762971"},{"product_id":"axminster-engineer-series-er32-precision-collet-wrench","title":"Axminster Engineer Series ER32 Precision Collet Wrench","description":"\u003cp\u003eER32 precision collet wrench.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116758520155,"sku":"910257","price":4.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910257_xl.jpg?v=1789762979"},{"product_id":"axminster-engineer-series-sx3-mill-floor-stand","title":"Axminster Engineer Series SX3 Mill Floor Stand","description":"\u003cp\u003eCabinet stand with shelves and a lockable door. Provides a stable base for the mill, at a comfortable working height. Built in swarf\/drip tray. Some assembly required.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116761338203,"sku":"210114","price":316.65,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/210114_xl.jpg?v=1789762987"},{"product_id":"axminster-engineer-series-12mm-t-slot-clamp-kit-for-mills","title":"Axminster Engineer Series 12mm T-Slot Clamp Kit for Mills","description":"\u003cp\u003eA milling vice is wonderful for clamping work which is true, square, parallel etc. but when it comes to odd shaped items like castings then the only answer is to clamp it. This very useful piece of equipment consists of 24 studs (4 each 75, 100, 125, 150, 175 and 200mm), six T-nuts, four coupling nuts, six flange nuts, six step clamps and six step blocks. All parts are heat treated, black oxide finished. The studs are M10 to suit 12mm table T-slots, especially the Axminster Sieg X2, Super X2, X3 \u0026amp; Super X3 machines.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54117330714971,"sku":"951675","price":43.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/951675_xl.jpg?v=1789765255"},{"product_id":"axminster-engineer-series-hss-slitting-saw-kit","title":"Axminster Engineer Series HSS Slitting Saw Kit","description":"\u003cp\u003eA set of three accurate, high quality high speed steel (HSS) 1.3\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e slitting saw blades, with a flat chisel edge. Supplied complete with a 3\/8\u003cspecial id=\"1\"\u003e\u003c\/special\u003e pin type mounting arbor. The widths are 1\/32\u003cspecial id=\"1\"\u003e\u003c\/special\u003e, 1\/16\u003cspecial id=\"1\"\u003e\u003c\/special\u003e and 3\/32\u003cspecial id=\"1\"\u003e\u003c\/special\u003e. Best suited for use in a mill, but can be used in a lathe when the workpiece is held in a vertical vice\/slide.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54117336973659,"sku":"953412","price":19.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/953412_xl.jpg?v=1789765347"},{"product_id":"axminster-engineer-series-100mm-cross-vice","title":"Axminster Engineer Series 100mm Cross Vice","description":"\u003cp\u003eUsed to accurately position a component in two directions on a pillar drill table. Adjustable gibs ensure consistent accuracy. There are dials on both the lateral and longitudinal travel making, drilling precise co-ordinates possible. The milling of non-ferrous materials and plastics is well within the capacity of these well made vices. Height 155mm.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54117350605147,"sku":"953002","price":61.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/953002_xl.jpg?v=1789765647"},{"product_id":"axminster-engineer-series-machine-coolant-pump-system","title":"Axminster Engineer Series Machine Coolant Pump System","description":"\u003cp\u003eThe Axminster Machine Coolant System consists of a 9 litre tank and a 95W 230V electric pump. Supplied as a complete kit, it also includes a flexible discharge hose and nozzle, 2m delivery hose pipe, 1m return hose, shut off valve and mounting bracket and fixings.\u003c\/p\u003e\u003cp\u003eThe unit is easy to retrofit to an existing machine. It is relatively small, so should not present any problems finding a convenient location. It will fit inside a lathe cabinet, under the bench, wherever you like, bear in mind you will need to top it up and clean it out occasionally.\u003c\/p\u003e\u003cp\u003eThe Axminster Machine Coolant Pump System is suitable for use with drilling\/milling machines, small lathes, metal cutting bandsaws, etc. The waste sieve filters swarf and is easy to remove and clean.  The tank has a mid baffle, which prevents sediment reaching the pump unit.\u003c\/p\u003e\u003cp\u003eSupplied with an inline switch, cable and fitted with 13A BS plug.  390mm long, 270mm deep and 320mm high.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118308348251,"sku":"104941","price":157.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/104941_xl.jpg?v=1789774828"},{"product_id":"ujk-self-centring-vice-for-drill-guide","title":"UJK Self Centring Vice for Drill Guide","description":"\u003cp\u003eMade to fit directly onto the UJK Drill Guide, this beautifully engineered self centring vice will be just as useful on any small pillar drill.\u003c\/p\u003e\u003cp\u003eA vee-notch in each face holds round or square stock perfectly centred and perpendicular. The maximum diameter or diagonal measurement is 45mm. With the jaws fully open the maximum capacity is 70mm x 45mm. The jaws run on  4 steel guide bars ensuring smooth perfectly parallel movement at all times.  Rotating the control knob clockwise opens the jaws and vice-versa to close. Threaded holes in the base correspond with fixing holes on the base of the UJK Drill Guide. It is a simple job to attach a sub-base for use elsewhere.\u003c\/p\u003e\u003cp\u003eThis would make a superb drill vice for the dedicated pen turner.\u003c\/p\u003e","brand":"UJK","offers":[{"title":"Default Title","offer_id":54118373523803,"sku":"106216","price":96.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106216_xl.jpg?v=1789777151"},{"product_id":"axminster-engineer-series-sx2-mill-floor-stand","title":"Axminster Engineer Series SX2 Mill Floor Stand","description":"\u003cp\u003eSteel constructed mill drill floor stand for the Axminster Engineer Series SX2.7 V2 Mill Drill. Made of steel, the stand features a drip tray and storage cabinet so all of your tooling is close to hand.\u003c\/p\u003e\u003cp\u003eOverall size is 410 x 490 x 905mm.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118625313115,"sku":"112889","price":149.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/112889_xl.jpg?v=1789788381"}],"url":"https:\/\/www.axminstertools.com\/collections\/milling-accessories.oembed?page=2","provider":"Axminster Tools","version":"1.0","type":"link"}