{"title":"Woodturning Fitments","description":"\u003ch3\u003eWoodturning Fitments\u003c\/h3\u003e\u003cp\u003eWoodturning fitments provide the essential components needed for mounting, adapting and securing accessories to your woodturning lathe. Including thread adaptors, inserts, drive centres, faceplate fittings and other mounting hardware, they help ensure compatibility between chucks, accessories and different lathe spindle sizes. Ideal for upgrading equipment, expanding workholding options and improving workshop flexibility, woodturning fitments are a practical addition to any turning setup. Browse the range to find woodturning fitments suited to your lathe and woodturning projects.\u003c\/p\u003e","products":[{"product_id":"axminster-woodturning-4-prong-drive-centre-25mm","title":"Axminster Woodturning 4 Prong Drive Centre - 25mm","description":"\u003cp\u003eThese 4-prong drive centres are designed to give non-slip drive when turning between centres. The prongs bite into the timber for consistent driving. They can be used on all types of spindle turning and are recommended when turning seasoned and balanced hardwood. A 4-prong drive minimises the risk of splitting the grain. It is the probably the most commonly used drive by turners for spindle work.  The centre point helps alignment. Place the point on the centre mark of your workpiece. Give the end of the drive a sharp tap with a mallet rather than using your lathe’s tailstock to push the drive home. This method removes any unnecessary pressure on your lathe’s bearings.\u003c\/p\u003e\u003cp\u003eAvailable in either 1, 2 or 3MT.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115703882075,"sku":"340105","price":12.48,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115703914843,"sku":"340106","price":12.48,"currency_code":"GBP","in_stock":true},{"title":"3 MT","offer_id":54115703947611,"sku":"340107","price":12.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340105_xl.jpg?v=1789756192"},{"product_id":"axminster-woodturning-4-prong-drive-centre-9-5mm","title":"Axminster Woodturning 4 Prong Drive Centre - 9.5mm","description":"\u003cp\u003eThese 4-prong drive centres are designed to give non-slip drive when turning between centres. The prongs bite into the timber for consistent driving. They can be used on all types of spindle turning and are recommended when turning seasoned and balanced hardwood. A 4-prong drive minimises the risk of splitting the grain. It is the probably the most commonly used drive by turners for spindle work.  The centre point helps alignment. Place the point on the centre mark of your workpiece. Give the end of the drive a sharp tap with a mallet rather than using your lathe’s tailstock to push the drive home. This method removes any unnecessary pressure on your lathe’s bearings.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115704111451,"sku":"340109","price":12.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340109_xl.jpg?v=1789756201"},{"product_id":"axminster-woodturning-4-prong-drive-centre-16mm","title":"Axminster Woodturning 4 Prong Drive Centre - 16mm","description":"\u003cp\u003eThese 4-prong drive centres are designed to give non-slip drive when turning between centres. The prongs bite into the timber for consistent driving. They can be used on all types of spindle turning and are recommended when turning seasoned and balanced hardwood. A 4-prong drive minimises the risk of splitting the grain. It is the probably the most commonly used drive by turners for spindle work.  The centre point helps alignment. Place the point on the centre mark of your workpiece. Give the end of the drive a sharp tap with a mallet rather than using your lathe’s tailstock to push the drive home. This method removes any unnecessary pressure on your lathe’s bearings. Available in either 1MT or 2MT.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115704504667,"sku":"340110","price":12.48,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115704537435,"sku":"340111","price":12.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340110_xl.jpg?v=1789756211"},{"product_id":"axminster-woodturning-ring-friction-drive","title":"Axminster Woodturning Ring Friction Drive","description":"\u003cp\u003eUsed in conjunction with the Ring \u0026amp; Centre Point Live Centre, this Ring Friction Drive is ideal for smaller spindle turning. As the points and rings on both exactly match, the timber can be quickly reversed if the grain happens to be running the wrong way. Two other benefits of the drive are (a) that the work can be loaded and loaded quickly when doing a production run and (b) the workpiece will stop revolving in the case of a mishap, a good safety feature for the novice turner and a great way to perfect skew chisel technique.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115705028955,"sku":"340125","price":10.73,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115705061723,"sku":"340126","price":10.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340125_xl.jpg?v=1789756221"},{"product_id":"axminster-woodturning-ring-centre-point-live-revolving-centre","title":"Axminster Woodturning Ring \u0026 Centre Point Live Revolving Centre","description":"\u003cp\u003eUnlike common pointed tailstock centres, a Live Ring Centre eliminates the risk of splitting small section or brittle timber. The tip has a small point to help with alignment when mounting your work. Support comes from the raised ring or rim. A Live Ring Centre leaves only a small mark on the end of the workpiece. The body features sealed dust proof bearings for a long life turning on the lathe. The dimensions of the ring and point exactly match those of the Axminster Woodturning Ring Friction Drive.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115705553243,"sku":"340138","price":20.82,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115705586011,"sku":"340139","price":20.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340139_xl.jpg?v=1789756239"},{"product_id":"axminster-morse-taper-arbor-jt6-to-2mt","title":"Axminster Morse Taper Arbor - JT6 to 2MT","description":"\u003cp\u003eA 2MT Morse taper to JT6 taper arbor to suit keyed and keyless chucks with a female JT6 taper in the body. Used to mount the chuck in the quill of a pillar drill or in the tailstock or headstock of a lathe with a matching morse taper. The double taper design preserves concentricity, both tapers are self-locking.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54115706700123,"sku":"340174","price":3.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340174_xl.jpg?v=1789756276"},{"product_id":"axminster-woodturning-4-prong-jumbo-drive-38mm-2mt","title":"Axminster Woodturning 4 Prong Jumbo Drive 38mm - 2MT","description":"\u003cp\u003eThis somewhat oversize centre is particularly useful when turning large diameter pieces or roughing unbalanced work prior to chucking, as with end grain hollow forms. The principle is that the increased diameter of the drive greatly reduces the risk of slipping due to the increased leverage resulting from turning a larger diameter workpiece.\u003c\/p\u003e\u003cp\u003eThe prongs bite into the timber for consistent driving. A 4-prong drive minimises the risk of splitting the grain. The centre point helps alignment. Place the point on the centre mark of your workpiece. Give the end of the drive a sharp tap with a mallet rather than using your lathe’s tailstock to push the drive home. This method removes any unnecessary pressure on your lathe’s bearings.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115706831195,"sku":"340177","price":22.32,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340177_xl.jpg?v=1789756284"},{"product_id":"axminster-woodturning-multi-head-live-revolving-centres","title":"Axminster Woodturning Multi-Head Live Revolving Centres","description":"\u003cp\u003eWe believe that this is the most universal tailstock centre available today. There are two sealed dust proof bearings in the body and the working end has a taper for mounting the various interchangeable tips, guaranteeing that they run perfectly concentric. There is an ejector ring behind the tip which is operated by two tommy bars. The centre is supplied with three tips, a standard 60\u003cspecial id=\"8\"\u003e\u003c\/special\u003e cone for general work, a 9.5mm diameter by 16mm long point for small or close work and a cup or ring centre for open grain or split turning. In addition to the standard tips there are three additional tips, available separately, which will further increase the scope of the centre. We hope that you will agree that we have covered just about every possibility and that the Multi-head Centre deserves a place in your tool box. Also available as a complete package deal (718221 or 718222 ) with 3 additional tips.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115706929499,"sku":"340185","price":58.57,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115706962267,"sku":"340186","price":58.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340185_xl.jpg?v=1789756294"},{"product_id":"axminster-woodturning-mini-live-revolving-centre","title":"Axminster Woodturning Mini Live Revolving Centre","description":"\u003cp\u003eOur miniature live revolving centre with a 22mm diameter head and twin dust proof bearings. It features an extended nose giving greater tool access; most important when turning very small items. The 90\u003cspecial id=\"8\"\u003e\u003c\/special\u003e nose tip reduces the risk of splitting small or open grained timbers are used, or the tailstock is over tightened.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115707060571,"sku":"340187","price":18.73,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115707093339,"sku":"340188","price":18.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340188_xl.jpg?v=1789756311"},{"product_id":"axminster-woodturning-pen-mandrels","title":"Axminster Woodturning Pen Mandrels","description":"\u003cp\u003eThese mandrels are machined with Morse taper mounting and have a shoulder to assist with removal. They are supplied with a number of spacers for locating the pen components.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"1 MT","offer_id":54115707486555,"sku":"340198","price":16.07,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115707519323,"sku":"340199","price":16.07,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340198_xl.jpg?v=1789756331"},{"product_id":"axminster-woodturning-60-degree-live-revolving-centre","title":"Axminster Woodturning 60 Degree Live Revolving Centre","description":"\u003cp\u003eThe most familiar of the live revolving centres and the one that most of us use. This 60\u003cspecial id=\"8\"\u003e\u003c\/special\u003e live revolving centre is made from top quality materials, incorporates two 'sealed for life' dust proofed bearings and will cover 90% of all turning applications.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115707650395,"sku":"340202","price":20.82,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115707683163,"sku":"340203","price":20.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340202_xl.jpg?v=1789756341"},{"product_id":"axminster-woodturning-4-prong-drive-centre-27mm-parallel","title":"Axminster Woodturning 4 Prong Drive Centre - 27mm Parallel","description":"\u003cp\u003eThe Axminster Woodturning 4-Prong parallel drive centre was initially designed to be used in the central bore of the Axminster Woodturning SK100 Dovetail Jaws Type C the C jaws. However, it can be gripped in any suitable lathe chuck able to grip the 27mm diameter mounting. It has principally been produced for those lathes that do not have a hollow headstock, but can also be used for those combined jobs where spindle turning is necessary before mounting the workpiece in the chuck.\u003c\/p\u003e\u003cp\u003eThe centre point helps alignment. Place the point on the centre mark of your workpiece. Give the end of the drive a sharp tap with a mallet rather than using your lathe’s tailstock to push the drive home. This method removes any unnecessary pressure on your lathe’s bearings.\u003c\/p\u003e\u003cp\u003eMounting diameter is 27mm.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115771089243,"sku":"410052","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/410052_xl.jpg?v=1789756692"},{"product_id":"axminster-woodturning-faceplate-50mm-3-4-x-16-tpi","title":"Axminster Woodturning Faceplate 50mm - 3\/4\" x 16 tpi","description":"\u003cp\u003e50mm diameter faceplate is CNC-produced for maximum accuracy and perfect balance. The timber mounting holes are fully countersunk on the rear face and lightly countersunk on the front face to ensure proper seating of the timber; circular grooves are provided to aid the centring of the blank on the plate. Please note that the 50mm faceplate is available with the 3\/4\u003cspecial id=\"1\"\u003e\u003c\/special\u003e x 16tpi thread only.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115814768987,"sku":"500090","price":10.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/500090_xl.jpg?v=1789756896"},{"product_id":"axminster-woodturning-faceplate-75mm","title":"Axminster Woodturning Faceplate 75mm","description":"\u003cp\u003e75mm diameter faceplate is CNC-produced for maximum accuracy and perfect balance. The timber mounting holes are fully countersunk on the rear face and lightly countersunk on the front face to ensure proper seating of the timber; circular grooves are provided to aid the centring of the blank on the plate.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"3\/4 x 16 tpi","offer_id":54115816898907,"sku":"500091","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"1 x 8 tpi","offer_id":54115816931675,"sku":"500097","price":20.98,"currency_code":"GBP","in_stock":false},{"title":"M33 x 3.5mm","offer_id":54115816964443,"sku":"500109","price":21.07,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/500091_xl.jpg?v=1789756910"},{"product_id":"axminster-woodturning-faceplate-100mm-m33-x-3-5mm","title":"Axminster Woodturning Faceplate 100mm - M33 x 3.5mm","description":"\u003cp\u003e100mm diameter faceplate is CNC-produced for maximum accuracy and perfect balance. The timber mounting holes are fully countersunk on the rear face and lightly countersunk on the front face to ensure proper seating of the timber; circular grooves are provided to aid the centring of the blank on the plate.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115819979099,"sku":"500125","price":30.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/500125_xl.jpg?v=1789756919"},{"product_id":"axminster-woodturning-faceplate-150mm-m33-x-3-5mm","title":"Axminster Woodturning Faceplate 150mm - M33 x 3.5mm","description":"\u003cp\u003e150mm diameter faceplate is CNC-produced for maximum accuracy and perfect balance. The timber mounting holes are fully countersunk on the rear face and lightly countersunk on the front face to ensure proper seating of the timber; circular grooves are provided to aid the centring of the blank on the plate.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115821912411,"sku":"500143","price":47.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/500143_xl.jpg?v=1789756929"},{"product_id":"axminster-woodturning-lathe-mounted-polishing-mop-arbor","title":"Axminster Woodturning Lathe Mounted Polishing Mop Arbor","description":"\u003cp\u003eThis accessory, turns your lathe into a polishing machine, pen turners find it especially useful for final finishing of acrylics and resins. A mop of your choice simply screws onto the tapered thread, when the lathe is switched on the mop 'climbs' up the taper, locking itself in place. These arbors make changing mops for different compounds quick and simple. A small hollow recess is provided at the tip so that the tailstock can be brought up to keep the arbor securely in place. The mop can be loaded with the appropriate polishing compound for putting that final gloss finish on your work. Be sure to remove the tool rest  before doing any polishing work. Details of suitable polishing mops and compounds can be found in the Sharpening, Grinding and Polishing section. The arbors are available with either 1 or 2 Morse taper.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54115911663963,"sku":"610037","price":13.32,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54115911696731,"sku":"610041","price":13.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/610037_xl.jpg?v=1789757942"},{"product_id":"axminster-woodturning-woodscrew-chuck-38mm-1-x-8tpi","title":"Axminster Woodturning Woodscrew Chuck 38mm - 1\" x 8tpi","description":"\u003cp\u003eThe 38mm (1.1\/2\u003cspecial id=\"1\"\u003e\u003c\/special\u003e) diameter wood screw chuck is a great choice for wooden fruit, drawer knobs, finials and other smaller projects of this type. The central screw is stainless steel with a deep sharp thread for a positive and secure hold. It only requires you to drill a single shallow hole in the blank. The screw fitted as standard to the chuck has a core diameter of approximately 4mm and a 19mm tapered thread.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115931062619,"sku":"910462","price":16.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910462_xl.jpg?v=1789758760"},{"product_id":"axminster-woodturning-woodscrew-chuck-75mm-m33-x-3-5mm","title":"Axminster Woodturning Woodscrew Chuck 75mm - M33 x 3.5mm","description":"\u003cp\u003eThis 75mm diameter screw chuck is a quick and  convenient method for mounting a turning blank on your lathe. The central screw is stainless steel with a deep sharp thread for a positive and secure hold. It only requires you to drill a single shallow hole in the blank. It is ideal for smaller or shallow workpieces, (always assess the suitability for the size of the work). For larger pieces, three screw holes are provided in the plate for extra security.\u003c\/p\u003e\u003cp\u003eFor particularly shallow pieces use a plywood spacer to reduce the effective length of the screw.\u003c\/p\u003e\u003cp\u003eSupplied fitted with an 8mm x 25mm long screw. Two smaller size screws are available separately, useful in making wooden fruit etc.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54115931652443,"sku":"910475","price":32.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/910475_xl.jpg?v=1789758768"},{"product_id":"axminster-woodturning-light-pull-drive","title":"Axminster Woodturning Light Pull Drive","description":"\u003cp\u003eThe Light Pull drive is a friction drive with steps 3mm, 6mm, 10mm and 16mm. Designed to help turning light pulls and similar small items with a through hole. Simply slip the blank onto the drive, bring up the tailstock with a revolving centre for support and away you go. The drive is designed to allow plenty of room to work around the light pull, including sanding and finishing. Using the Light Pull drive is a great way to use up all those small offcuts, which are too good to throw away.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"1 MT","offer_id":54116553326939,"sku":"950365","price":17.9,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54116553359707,"sku":"950366","price":17.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/950366_xl.jpg?v=1789761660"},{"product_id":"axminster-morse-taper-arbor-jt3-to-2mt","title":"Axminster Morse Taper Arbor - JT3 to 2MT","description":"\u003cp\u003eA 2MT Morse taper to JT3 taper arbor to suit keyed and keyless chucks with a female JT3 taper in the body. Used to mount the chuck in the quill of a pillar drill or in the tailstock or headstock of a lathe with a matching morse taper. The double taper design preserves concentricity, both tapers are self-locking.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54116682498395,"sku":"340171","price":2.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340171_xl.jpg?v=1789762404"},{"product_id":"axminster-morse-taper-arbors-b16-to-mt","title":"Axminster Morse Taper Arbors - B16 to MT","description":"\u003cp\u003eA Morse taper to B16 taper arbor to suit keyed and keyless chucks with a female B16 taper in the body. Used to mount the chuck in the quill of a pillar drill or in the tailstock or headstock of a lathe with a matching morse taper. The double taper design preserves concentricity, both tapers are self-locking.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"1 MT","offer_id":54116846141787,"sku":"700407","price":3.32,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54116846174555,"sku":"700408","price":2.82,"currency_code":"GBP","in_stock":true},{"title":"3 MT","offer_id":54116846207323,"sku":"700409","price":3.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/700407_xl.jpg?v=1789763203"},{"product_id":"axminster-woodturning-conical-tip-for-multi-head-live-revolving-centre","title":"Axminster Woodturning Conical Tip for Multi-Head Live Revolving Centre","description":"\u003cp\u003eThe Conical Centre is an additional tip for use with the Axminster Multi-Head Live Revolving Centre. A 25mm diameter, 13mm deep internal cone ensures perfect, quick centring on small work or as a support when turning balls and other spherical forms.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54116874748251,"sku":"340168","price":4.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340168_xl.jpg?v=1789763266"},{"product_id":"axminster-woodturning-pipe-centre-for-multi-head-live-revolving-centre","title":"Axminster Woodturning Pipe Centre for Multi-Head Live Revolving Centre","description":"\u003cp\u003eThe Pipe Centre is an additional tip for use with the Axminster Multi-Head Live Revolving Centre. The diameter is 38mm with a 90\u003cspecial id=\"8\"\u003e\u003c\/special\u003e tip angle designed to perfectly centre work when located in a pre-bored hole, useful for things like pepper mills etc.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54116876353883,"sku":"340170","price":7.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340170_xl.jpg?v=1789763274"},{"product_id":"axminster-30mm-mini-faceplate-for-multi-head-live-revolving-centre","title":"Axminster 30mm Mini Faceplate for Multi-Head Live Revolving Centre","description":"\u003cp\u003eThis 30mm diameter mini faceplate with a central screw is an additional tip for use with the Axminster Multi-Head Live Revolving Centre. It enables you to mount a custom made wooden support onto the Axminster Multi-head live revolving centre. This becomes very useful when turning long stemmed goblets and other items that are sometimes difficult to support at the tailstock.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54116877664603,"sku":"340169","price":4.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/340169_xl.jpg?v=1789763283"},{"product_id":"axminster-woodturning-point-set-for-hollow-live-centre","title":"Axminster Woodturning Point Set for Hollow Live Centre","description":"\u003cp\u003eReplacement point set for hollow live centre.\u003c\/p\u003e\u003cp\u003eA set of two replacement points for your hollow live centre. The short point protrudes a mere 3mm beyond the ring and allows an accurate impression of the ring to be made on the end of the timber. Having made the impression, the point can be removed from the centre and the work re-located on the ring impression, allowing an accurate hole to be bored. When boring right through, the timber is drilled from one end then reversed, a counterbore drive used to hold the timber in the headstock and the boring process repeated from the tailstock end. Fitting the long point gives good access for all sorts of miniature work, including light pulls and lace bobbins.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54116879368539,"sku":"510094","price":6.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/510094_xl.jpg?v=1789763291"},{"product_id":"axminster-woodturning-hollow-live-centre-with-chip-ejection","title":"Axminster Woodturning Hollow Live Centre With Chip Ejection","description":"\u003cp\u003eAn excellent improvement to our standard hollow live centre, this centre features three chip ejection ports so that during use the bit doesn't have to be completely withdrawn from the tailstock. With short and long removable points, twin ball bearings and an 8mm(5\/16\u003cspecial id=\"1\"\u003e\u003c\/special\u003e) diameter through hole, this centre is an invaluable aid when long hole boring. The short point protrudes a mere 3mm beyond the ring and allows an accurate impression of the ring to be made on the end of the timber. Having made the impression, the point can be removed from the centre and the work relocated on the ring impression, allowing an accurate hole to be bored. When boring right through, the timber is drilled from one end then reversed, a counterbore drive is used to hold the timber in the headstock and the boring process repeated from the tailstock end. Fitting the long point gives good access for all sorts of miniature work, including light pulls and lace bobbins. A truly multi-functional accessory, worthy of a place in any turner's tool kit.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54117798019419,"sku":"504594","price":29.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/504594_xl.jpg?v=1789768969"},{"product_id":"axminster-woodturning-counterbore-drive","title":"Axminster Woodturning Counterbore Drive","description":"\u003cp\u003eEquipped with a 5\/16\u003cspecial id=\"1\"\u003e\u003c\/special\u003e(8mm) diameter locating pin, these centres are used for accurately locating and driving items such as lamp columns which have already been partly bored through from one end. Where this centre differs from other such centres is that an additional boring head is available which allows more accurate efficient boring operations to be carried out. This is very useful when turning longer items that need to be made in more than one piece such as standard lamps or curtain poles etc.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54117812207963,"sku":"504696","price":15.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/504696_xl.jpg?v=1789769384"},{"product_id":"axminster-woodturning-long-hole-boring-bit-8mm-5-16","title":"Axminster Woodturning Long Hole Boring Bit - 8mm (5\/16\")","description":"\u003cp\u003eSpecifically designed to drill accurate holes in the end grain of wood mounted on the woodturning lathe, the parabolic flute design of this bit clears the chips quickly and prevents chip burn. As with all long hole augers, frequent withdrawing will help to clear the waste and reduce the risk of overheating. Dimensions are 880mm overall with 6.5mm shank and a bit diameter of 8mm at the tip tapering to 7.9mm for clearance. Made in Austria from top quality HSS-M2 steel. A worthwhile accessory is the Long Hole Boring  Handle (107156) (245 x 35mm) which is available separately. Made in Axminster from steel with a comfortable rubber grip, this handle will allow accurate hole depth and prevent accidental contact of the bit with your counterbore drive.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54117812306267,"sku":"504581","price":44.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/504581_xl.jpg?v=1789769393"},{"product_id":"axminster-woodturning-boring-head-for-counterbore-drive","title":"Axminster Woodturning Boring Head for Counterbore Drive","description":"\u003cp\u003eIf you need to join two turned sections together, then this boring head will make a useful addition to the counterbore drive, enabling accurate boring of turned sections ready to accept a corresponding dowel turned on the adjoining section. Simply locates on the shaft of the counterbore drive in place of the driving head.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54117812437339,"sku":"506365","price":12.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/506365_xl.jpg?v=1789769409"},{"product_id":"axminster-woodturning-quick-change-pen-turners-live-centre","title":"Axminster Woodturning Quick Change Pen Turner's Live Centre","description":"\u003cp\u003eThe Quick Change Pen Turner's 2MT Live Centre is intended for use with any of the Axminster pen mandrels and other 6.2mm diameter mandrels. With most pen mandrels the blanks are mounted on the shaft and held in place with a nut at the tailstock end. A live centre is then brought up against the end of the mandrel shaft to support it during turning. The Quick Change Pen Turner's Live Centre eliminates the need for a nut and eliminates compression of the mandrel shaft. The result is pressure is put only on the blank and bushings, resulting in smoother turning. Spacers are no longer needed, as any exposed section of shaft is accommodated within the body of the centre.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54117862703451,"sku":"506392","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/506392_xl.jpg?v=1789769540"},{"product_id":"axminster-woodturning-compression-pen-mandrel","title":"Axminster Woodturning Compression Pen Mandrel","description":"\u003cp\u003eOperating in a different way to other mandrels, the Axminster Compression Pen Mandrel is a big step forward in mandrel design. The prepared pen blanks are located on the shaft with any bushings that may be required and then the  included hollow revolving centre is simply moved into position over the shaft. When the tailstock quill is tightened it is the blank and bushings that are held in compression and not the shaft as with conventional mandrels. The result is improved concentricity and results in less vibration during turning. Because the silver steel mandrel shaft is accommodated within the revolving tailstock centre, length adjustment is unnecessary. If you make a lot of pens the time saved by using this mandrel would be considerable.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"1 MT","offer_id":54117901992283,"sku":"506444","price":57.73,"currency_code":"GBP","in_stock":true},{"title":"2 MT","offer_id":54117902025051,"sku":"506445","price":57.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/506444_xl.jpg?v=1789769765"},{"product_id":"axminster-woodturning-ring-point-tip-for-deluxe-live-revolving-centre","title":"Axminster Woodturning Ring Point Tip For Deluxe Live Revolving Centre","description":"\u003cp\u003eThe Ring Point for the Axminster Deluxe Live Revolving Centre applies pressure to your work over a relatively wide area making it particularly useful for delicate timber or soft wood liable to split. You can adjust the amount of compression to suit the timber. The 8mm diameter matches the Ring Drive Friction centre allowing you to swap your work end over end without losing concentricity. 24mm long.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54117976441179,"sku":"506921","price":11.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/506921_xl.jpg?v=1789771009"},{"product_id":"axminster-woodturning-conical-tip-for-deluxe-live-revolving-centre","title":"Axminster Woodturning Conical Tip For Deluxe Live Revolving Centre","description":"\u003cp\u003eThe Conical Centre for the Axminster Deluxe Live Revolving Centre is very useful. The 28.5mm internal cone self-centres your work either for turning small spindles or sanding previously turned items. This also works exceptionally well as support on a curved surface or simply where the mark left by a centre is unacceptable.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54117979324763,"sku":"506919","price":11.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/506919_xl.jpg?v=1789771072"},{"product_id":"axminster-woodturning-pro-drives","title":"Axminster Woodturning Pro Drives","description":"\u003cp\u003eThese centres are safe, secure and offer greater versatility and accuracy than the more common 2 or 4-prong drive centres. Being made entirely of stainless steel they will not rust or corrode when used with green timber or left in an unheated workshop.\u003c\/p\u003e\u003cp\u003eThe centre features a spring loaded, stainless steel centre point, with a sharp toothed outer ring providing the drive. The Pro Drive is unique in that you can vary the spring tension. There are numerous advantages when using this drive. Repositioning your work is accurate; the work always goes back in the same place. They are safe; reduce the pressure from the tailstock and in the event of a dig-in the work will simply stop revolving. Reducing the tailstock pressure further allows you to stop the work and inspect it without switching off the lathe. In production, the centre allows unloading and reloading by unwinding the tailstock without stopping the lathe. When used for eccentric turning, the centre will still drive even if its full diameter is not in contact with the work. Being made entirely of stainless steel they will not rust or corrode when used with green timber or left in an unheated workshop.\u003c\/p\u003e\u003cp\u003eAvailable in 1MT or 2MT.\u003c\/p\u003e\u003cp\u003eN.B. The head diameter measurement is taken from the diameter of the teeth points where initial contact is made.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"2 MT \/ 21 mm","offer_id":54117987025243,"sku":"101605","price":29.48,"currency_code":"GBP","in_stock":true},{"title":"1 MT \/ 21 mm","offer_id":54117987058011,"sku":"101725","price":29.48,"currency_code":"GBP","in_stock":true},{"title":"1 MT \/ 16 mm","offer_id":54117987090779,"sku":"101889","price":26.07,"currency_code":"GBP","in_stock":true},{"title":"2 MT \/ 16 mm","offer_id":54117987123547,"sku":"101890","price":26.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/101605_xl.jpg?v=1789771311"},{"product_id":"axminster-woodturning-ring-centre-converter","title":"Axminster Woodturning Ring Centre Converter","description":"\u003cp\u003eAn inspired idea from our engineering and manufacturing department. This useful piece of kit turns any 60\u003cspecial id=\"8\"\u003e\u003c\/special\u003e live centre into a  tailstock ring centre or cup centre.  This converter has a 60\u003cspecial id=\"8\"\u003e\u003c\/special\u003e internal angles, so all you need do is simply slip it onto the point of the live centre. Made of S303 stainless steel in Axminsters CNC machine workshop.\u003c\/p\u003e\u003cp\u003eWhen used as a ring centre, point of the live centre remains slightly proud for centring your work. A ring centre is particularly useful when turning timbers with a tendency to split. The ring offers support as opposed to a point, which can act more like a wedge. The crown of the ring exactly matches the other Axminster ring centres. If you use a solid ring centre in the headstock, it is possible to flip the workpiece end over end and replace it on the lathe exactly using the impressions left by the rings.\u003c\/p\u003e\u003cp\u003eFlip the converter over and you have a small cup or cone centre for support against a curved surface, useful for turning or finishing fruit or spheres.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54118290325851,"sku":"104150","price":6.15,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/104150_xl.jpg?v=1789773907"},{"product_id":"axminster-13mm-keyless-chuck","title":"Axminster 13mm Keyless Chuck","description":"\u003cp\u003eHigh precision, rugged, all steel drill chucks with B16 mounting tapers. Equally suitable for use in drill presses, milling machines or all types of lathes. The jaw opening range is 0-13mm. This chuck fits the optional B16- 1, 2 or 3MT arbors listed separately. A chuck to upgrade the standard chucks offered on some machines, or as accessories for wood or metal turning lathes.\u003c\/p\u003e","brand":"Axminster","offers":[{"title":"Default Title","offer_id":54118342590811,"sku":"700404","price":42.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/700404_xl.jpg?v=1789776605"},{"product_id":"axminster-woodturning-pro-live-centre-16mm-2mt","title":"Axminster Woodturning Pro Live Centre 16mm - 2MT","description":"\u003cp\u003eThe Axminster 16mm Pro Live Centre 2MT exactly matches the Axminster 16mm Pro Drive. Like the drive centre, it is made entirely of stainless steel and will not rust or corrode when used with green timber or left in an unheated workshop. It features a spring-loaded, stainless steel centre point. The spring tension is variable; the adjustment is a simple matter of turning a grub screw.\u003c\/p\u003e\u003cp\u003eThe Axminster Pro Live Centre offers several advantages. With the spring-loaded point, it is easy to centre on the work. Unlike the more common conical shaped live centre, the Pro Live Centre supports the work over a wide area hence there is no chance of the centre splitting the work. As the live centre is an exact match to the drive, you can reverse your work with confidence, repositioning in perfect realignment. This is useful if the wood grain dictates the direction of cut, or is necessary to achieve a particular design. Due to the large size of the bearings the Axminster 16mm Pro Live Centre is only available in 2MT.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54118383059291,"sku":"106539","price":46.65,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106539_xl.jpg?v=1789777688"},{"product_id":"axminster-woodturning-pro-live-centre-21mm-2mt","title":"Axminster Woodturning Pro Live Centre 21mm - 2MT","description":"\u003cp\u003eThe Axminster 21mm Pro Live Centre 2MT exactly matches the Axminster 21mm Pro Drive. Like the drive centre, it is made entirely of stainless steel and will not rust or corrode when used with green timber or left in an unheated workshop. It features a spring-loaded, stainless steel centre point. The spring tension is variable; the adjustment is a simple matter of turning a grub screw.\u003c\/p\u003e\u003cp\u003eThe Axminster Pro Live Centre offers several advantages. With the spring-loaded point, it is easy to centre on the work. Unlike the more common conical shaped live centre, the Pro Live Centre supports the work over a wide area hence there is no chance of the centre splitting the work. As the live centre is an exact match to the drive, you can reverse your work with confidence, repositioning in perfect realignment. This is useful if the wood grain dictates the direction of cut, or is necessary to achieve a particular design. Due to the large size of the bearings the Axminster 21mm Pro Live Centre is only available in 2MT.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54118383157595,"sku":"106540","price":49.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/106540_xl.jpg?v=1789777696"},{"product_id":"axminster-woodturning-long-hole-boring-bit-handle","title":"Axminster Woodturning Long Hole Boring Bit Handle","description":"\u003cp\u003eThe Axminster Woodturning long hole boring bit handle uses an ER20 collet to grip the 6.5mm shaft of the Evolution Series long hole boring bit (available separately, order part No. 504581). The handle is hollow, allowing the shaft of the bit to pass through. This useful feature enables you to set a predetermined boring depth, the handle making contact with the tailstock acts as a stop. This prevents the bit coming into contact with your counterbore drive.\u003c\/p\u003e\u003cp\u003eFitting an alternative ER20 collet, allows you to use the handle for tools with different shaft diameters.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54118414811483,"sku":"107156","price":41.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/107156_xl.jpg?v=1789778978"},{"product_id":"axminster-woodturning-6-prong-drive-centre-25mm-2mt","title":"Axminster Woodturning 6 Prong Drive Centre 25mm - 2MT","description":"\u003cp\u003eMade in Axminster in our own CNC manufacturing facility from high quality stainless steel. These drive centres will not rust or corrode from changes in workshop humidity or the turning of wet timber. Six prongs gives you a 50% increase in gripping power over a traditional 4-prong drive. This is a reliable and positive drive centre that transfers your lathe’s drive to the work with much improved tooth engagement. It has a 25mm diameter head, the central point projects 2mm for ease of location. With six sharp 5.5mm chisel points at 60\u003cspecial id=\"8\"\u003e\u003c\/special\u003e intervals these are highly effective for turning hard woods, softwoods and wet timber.\u003c\/p\u003e","brand":"Axminster Woodturning","offers":[{"title":"Default Title","offer_id":54118458458459,"sku":"108115","price":15.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/108115_xl.jpg?v=1789780703"},{"product_id":"perform-1mt-live-centre","title":"Perform 1MT Live Centre","description":"\u003cp\u003eThe Perform 1MT Live Centre has a 30mm diameter head and twin dust proof bearings. The 90\u003cspecial id=\"8\"\u003e\u003c\/special\u003e nose tip reduces the risk of splitting small or open grain timbers, or if the tailstock is over tightened.\u003c\/p\u003e\u003cp\u003eThe centre is made in Axminster, UK and has CNC level accuracy.\u003c\/p\u003e","brand":"Perform","offers":[{"title":"Default Title","offer_id":54118779781467,"sku":"113644","price":10.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/113644_xl.jpg?v=1789791712"},{"product_id":"perform-pen-turning-centres-1mt","title":"Perform Pen Turning Centres 1MT","description":"\u003cp\u003eThe Perform Pen Turning Centres are essential accessories for successful pen turning. When pen turning, you would typically use a pen mandrel, where the blanks are mounted on the shaft and held in place with a nut at the tailstock end. A live centre is brought up against the end of the mandrel to support it during turning. The Perform Pen Turning Centres eliminate the need for a pen mandrel, as they clamp the pen blank and tube from either side, giving a supportive and strong base for turning.\u003c\/p\u003e\u003cp\u003eSupplied are two centres, for the headstock and tailstock. Suited to the Perform PD205WL Woodturning Lathe.\u003c\/p\u003e\u003cp\u003eThe centres are made in Axminster, UK and have CNC level accuracy.\u003c\/p\u003e","brand":"Perform","offers":[{"title":"Default Title","offer_id":54118781649243,"sku":"113685","price":16.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/113685_xl.jpg?v=1789791806"},{"product_id":"perform-4-prong-1mt-drive-centre","title":"Perform 4 Prong 1MT Drive Centre","description":"\u003cp\u003eThe Perform 4 Prong 1MT Drive Centre is perfect for spindle work. Gripping the timber, they prevent your piece from slipping by biting into the timber for consistent driving. A 4 prong drive also minimises the risk of splitting the grain.\u003c\/p\u003e\u003cp\u003eThe centre point helps alignment so place this on the centre of your workpiece. Give the end of the drive a sharp tap with a mallet rather than using your lathe’s tailstock to push the drive home. This method removes any unnecessary pressure on your lathe’s bearings.\u003c\/p\u003e\u003cp\u003eThe centre is made in Axminster, UK and has CNC level accuracy.\u003c\/p\u003e","brand":"Perform","offers":[{"title":"Default Title","offer_id":54118785220955,"sku":"113643","price":10.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/0652\/0667\/files\/113643_xl.jpg?v=1789791951"}],"url":"https:\/\/www.axminstertools.com\/collections\/woodturning-fitments.oembed?page=3","provider":"Axminster Tools","version":"1.0","type":"link"}