Axcaliber Three Wing Slot Cutter Set
952565
Axcaliber Three Wing Slot Cutter Set
952565
Key Features
- Axcaliber three wing slot cutter set (1/2" shank)
- A very versatile set for a wide range of groove sizes
- Suitable for grooves from 3.2mm to 18mm x 12.7mm deep
- PTFE coating helps minimise resin build-up
- This cutter is for use in router tables only
- View full description
Customers Also Viewed
Recommended Accessories
-
-
DMT Diamond Sharpening Card - Fine 600gFrom £20.98 £17.48 -
Lee Valley Router Bit Holder 1/2" Shank - (Pkt 6)From £5.38 £4.48 -
Rider Square Blade Awl with Hornbeam HandleFrom £8.48 £7.07 -
-
-
-
-
-
-
-
Show more
Show less
Designed for router table use, this set can be used to create slots, grooves and rebates from 3.2mm to 18mm in depth. The set includes: 4 x three winged cutters 3.2, 4, 4.8, and 6.4mm in width. 1/2" shank arbor. 21 shims (8 x 0.1mm, 4 x 0.5mm, 5 x 1mm, 2 x 3mm and 2 x 6mm).
N.B. The carbide edges of the cutters should never touch; arrange the cutters to prevent this. Use only the thicknesses provided in the set. Be sure all cutters are assembled in the correct rotational direction.Safety tips: Never use the slot cutter set without shims between the cutters. The distance between the cutters can vary from 1mm to 1.5mm. A shim must also be positioned between the ball bearing and the cutters.