The Jet JWL1221VS is different to every other lathe in the Jet range. The whole lathe has been designed to make the woodturning experience better by focusing on control. As with all other JET lathes, this one is made from cast iron, but the bed width is much wider than is usually found on machines of this size. This gives great support to the tool rest holder, which also stays exactly where you clamp it even under the heaviest loads. The spindle is supported by heavy duty bearings and is quietly driven by a 745W DC variable speed motor via a three step, multi V belt system. All of the motor controls are very conveniently located together; the speed control, spindle speed digital readout and forward/reverse selector all come naturally to hand. The tall, rigid tailstock has an ACME barrel lead screw with 64mm of travel, the barrel and headstock spindles have 2MT tapers. Camlocks on both tailstock and toolrest holder allow easy positioning just where you want them. To help keep things tidy there are tool and cable storage fittings on the bed, keeping those essential tools within easy reach. The lathe stand has a built-in storage tray plus wide feet for stability. This is without doubt a very fine small lathe.
N.B. The distance between centres will vary and be dependent on the type of centres or accessories used.
|Distance Between Centres||520 mm|
|Headstock Taper||2 MT|
|Max Diameter over Bed||318 mm|
|Nett Weight||50 kg|
|Overall L x W x H||1,003 mm x 229 mm x 445 mm|
|Spindle Thread||M33 x 3.5 mm|
|Tailstock Taper||2 MT|
|Lathe Speed||60 - 3,600 rpm (var)|
|Tool Post Diameter||16 mm (5/8")|