Earn Points & Save PoundsLamello Clamex P-14 Zeta Connector
Lamello Clamex P-14 Zeta Connector
Key Features
- Unique fitting to overcome many design problems
- Clamps, locking joint in place and is also detachable
- No glue or screws are required, simple assembly
- Only visible sign of joint is a single 6mm hole
- Special ‘T’ slot needs to be cut by Lamello Zeta biscuit jointer
- Joint angles 30° – 180°
- Made from fibreglass reinforced plastic with zinc die-cast lever
- Suitable for solid wood, composite boards and other sheet materials
- View full description
Customers Also Viewed
Recommended Accessories
-
-
-
-
-
-
-
-
-
-
JSP SpringFit™ Fold Flat Valved Respirator FFP2 (Pkt 10)Special Price £16.45 £13.71 was £18.28 £15.23 Save £1.83 £1.52 -
-
-
-
-
-
-
Axminster Stainless Steel Metric Rule - 300mmSpecial Price £2.95 £2.46 was £3.28 £2.73 Save £0.33 £0.27 -
-
Axminster Combination Square Metric 300mmSpecial Price £15.20 £12.67 was £17.88 £14.90 Save £2.68 £2.23
Discover Lamello
Visit our Axminster Tools store in Devon or arrange a video call to explore the Lamello range. For professional or project-specific requirements, we can coordinate a visit from a Lamello technical specialist to deliver a personalised on-site demonstration.
This is a truly amazing connector with a host of uses. Lamello has overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. The Clamex P is a biscuit shaped fitting with a ‘T’ profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. Ideally suitable for connections up to 45° in 18/19mm panels and for 90° connections in 16mm panels. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the ‘T’ to the bottom using a unique vertical mechanical drive. Made from fibreglass reinforced plastic, lever zinc die-cast for strength (tensile fitting strength 1000N = 100kg). Overall length is 66mm x width 27mm, each half has a depth of 14.5mm and it is 7mm in width (9.7mm o/a with ‘T’). Supplied as a pack of 80, 300 or 1000.