Lie-Nielsen Honing Guide Jaws
- Increase the potential of the Lie-Nielsen honng guide
- A range of additional jaws for sharpening specialist tools
- Sharpen tools such as narrow chisels, specialised plane blades and skew blades
- View full description
Customers Also Bought
Recommended Accessories
-
-
-
-
Axminster Trade Clamps Forged Flat Bar Clamp£13.78 £11.48 -
-
-
-
-
The Lie-Nielsen Honing Guide comes with a standard pair of jaws that can accommodate most bevel edge and common plane blades. This range of additional jaws allows you to sharpen more specialist tools such as narrow chisels, specialised plane blades and skew blades.
Chisel Jaws (101894) fit 3mm(1/8") and 4.8mm(3/16") bevel edge chisels (as well as 6mm(1/4") to 19mm(3/4") bevel edge chisels).
Mortice Chisel Jaws (101896) fit all mortice chisels, as well as 25mm(1") bevel edge chisels.
Long Jaws (101895) fit blades for the following Lie-Nielsen planes: No. 610, 10-1/4, 041, 042, 073, 1/2 and 85. These jaws are reversible. The short end hones a bevel up to 40° and the long end hones a bevel up to 30°.
18° Skewed Jaws (101879 and 101891) fit Lie-Nielsen No. 140 Skew Block Plane (left or right hand).
30° Skewed Jaws (101892 and 101893) fit Lie-Nielsen No. 98/99 Side Rebate Planes (left or right hand).
Key Features
- Increase the potential of the Lie-Nielsen honng guide
- A range of additional jaws for sharpening specialist tools
- Sharpen tools such as narrow chisels, specialised plane blades and skew blades