Garryflex 3 Piece Abrasive Block Set (Fine, Med & Coarse)
Customers Also Viewed
Made for removing light rust or tarnish and restoring a bright metal finish particularly to cast iron and steel. Garryflex is a block approximately 80mm x 50mm x 20mm made of a rubber like compound impregnated with silicon carbide abrasive particles. The blocks can be used dry but for best results use a lubricant such as water, paraffin, oil, camellia oil etc. (Do not use WD40 or similar as these tend to eat away at the compound). Garryflex blocks can also be cut to shape if necessary; the amount of elbow grease used with this product is entirely optional. The pack consists of one of each; coarse 60 grit (Blue), medium 120 grit (Dk Grey) and fine 240 grit (Brown).
- Remove light rust or tarnish restoring a bright metal finish
- Impregnated with silicon carbide abrasive particles
- Suitable for dry or wet (lubricant recommended) use
- Can be cut to shape
- One of each; coarse 60g (Blue), medium 120g (Dk Grey) and fine 240g (Brown)