Christmas discounts, deals and inspiration. Shop & save today!
Axminster Model Engineer Series SX2 Mini Mill
505099
Axminster Model Engineer Series SX2 Mini Mill
505099
Key Features
- Constructed in cast iron for vibration free running
- Ground and hardened slideways with gib strip adjustment
- Milling head and column tilts to 45° left & right
- 500W high torque DC brushless motor with belt spindle drive
- Fine down feed control for accurate tool height setting
- Coarse down feed for drilling operations
- 3MT spindle fitted with a 13mm drill chuck and arbor
- 13mm drilling, 16mm end milling and 30mm face milling capacity
- View full description
Customers Also Viewed
Recommended Accessories
-
-
-
-
-
-
Axminster Engineer Series 17 Piece ER32 Precision Collet SetFrom £164.98 £137.48 -
Axminster Engineer Series ER32 Precision Collet HolderFrom £31.28 £26.07 -
-
Axminster Professional Master Precision TapeSpecial Price £7.49 £6.24 was £9.98 £8.32 Save £2.49 £2.07 -
-
-
Show more
Show less
A fine, high precision mill/drilling machine, an ideal companion to the SC2 lathe. Constructed in cast iron with a finely ground table with 12mm T slots, and ground and hardened slideways. The milling head and column can tilt to 45° left or right for compound angle milling or drilling. The ample power comes from a high torque, brushless 500W DC motor with variable speed, giving a spindle speed range of 100 - 2,500rpm. It also has a notably quiet running spindle belt drive system. The spindle has an internal 3MT bore to enable a large range of tooling to be used. The headstock quill has a fine downfeed control feature for milling and a rack and pinion downfeed system for drilling. A gas support strut holds the headstock in position. The table leadscrews are covered for protection against swarf and debris. There is a connection port on the headstock for the optional digital spindle speed display panel. Supplied with a drill chuck and arbor, safety guard, tools and three drawbars 10mm, 12mm, 3/8 Whitworth. This is a superb, small mill for the model engineer.
