The AP150BS is a strong, robustly built belt sander, fabricated from heavy gauge steel plate and cast iron components. It provides good versatility, the belt arm can be used in any position from horizontal to vertical. The belt arm pivots around a very large flange with a graduated scale with the outer end of the belt drive roller supported in its own ball bearing assembly. Fitted with a very comprehensive guarding system that allows you to expose only the amount of sanding belt required, but still allows very easy changes of the belts. This machine has a large cast iron sanding table, which gives great support and tilts from -15° to +45°. If used as a linisher in the horizontal position, the guarding can be removed to expose the maximum amount of belt, a fixed work stop is provided. The close fitting guarding coupled with two 62mm dust outlets offers effective extraction when attached to a suitable fine dust collector. Uses standard 150 x 1,220mm abrasive belts. Supplied with one belt.
It's probably the most comprehensive free guarantee ever - look for the icon and put your trust in Axminster. So sure are we of the quality, we cover all parts and labour free of charge for three years.
Machine Classification
These products are designed and intended to be used by businesses with occasional periods of continuous work. They must be regularly maintained and serviced annually. Guarantee is void when used for industrial use or as part of a production line.