Veritas Gent's Saws

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Saw Blade Type

From £67.98 £56.65

Qty

0.4mm thick high-carbon steel; cuts easily and stays true
Injection moulded back creates a solid one-piece blade/spine/mount assembly
Brass nut secures comfortable hardwood handle
View full description

Recommended Accessories

Veritas Jointer & Edger
From £21.98 £18.32
Veritas Saw File Holder
From £46.98 £39.15
Axcaliber FineLine PTFE Coated Handsaw
From £14.98 £12.48

Choose
WoodSpur Torx Head Wood Screw Assortment (1,500 Pieces)
Special Price £19.98 £16.65 was £29.98 £24.98 Save £10.00 £8.33
Axminster Professional Master Precision Tape
From £11.88 £9.90
Axminster Workshop Four Grit Diamond Hone
From £9.98 £8.32
Axminster Professional Stainless Steel Metric Rule - 300mm
From £7.98 £6.65
UJK Level Box
From £24.98 £20.82
Titebond Original Wood Glue
From £7.78 £6.48

Choose
Rider Square Blade Awl with Hornbeam Handle
From £12.18 £10.15
JSP SpringFit™ Fold Flat Valved Respirator FFP2 (Pkt 10)
From £13.98 £11.65
Axminster Workshop Centrotec Compatible Depth Adjustable Bit Holder
From £6.98 £5.82

Show less

In Detail

Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side. The 20tpi ripsaw has teeth with a 14" rake angle and a 60° included angle. The teeth on the 22tpi crosscut saw have a rake angle of 15°, an included angle of 60° and alternating 15° bevel angles so that they sever rather than tear wood fibres. Both saws have a cut depth of 40mm. For strength and rigidity, the glass and stainless steel-filled polymer spine is moulded over the blade and handle stud. A brass nut secures the hardwood handle to the blade. Made in Canada.