A two-part epoxy adhesive for permanent, waterproof, structural gap filling and gluing applications; it bonds to wood, metals, fibreglass and concrete. Six10 is a two-part non-sagging epoxy, suitable for vertical or overhead use. It can be used to fill cracks, coat and seal end grain on wood, and to wet out light to moderate weight reinforcing fabrics such as fibreglass and carbon fibre. It is also suitable for small fibreglass boat repairs. This adhesive has a long working time with fast 'thru-cure'. The special static mixer nozzle dispenses both resin and hardener in metered amounts. Working time is 42 minutes at 21°C; the mix will solidify in 5–6 hours, temperature dependent. Supplied in a 190ml cartridge, it will fit a standard sealant gun.
Key Features
Two-part epoxy adhesive, waterproof and structural gap filling
Non-sagging epoxy, suitable for vertical or overhead use
Use to fill cracks, coat and seal end grain on wood
Mixer nozzle dispenses both resin and hardener in metered amounts