Earn Points & Save Pounds
Veritas Skew Block Plane PM-V11
Veritas Skew Block Plane PM-V11
Key Features
- Versatile; excels at trimming rebates and planing end grain
- Blade flush with sides, corners are clean and accurate
- Skewed blade makes cutting easier; helps pull the fence into the work
- Norris-style adjuster guarantees precise blade setting
- Movable toe (fully enclosed by the body casting) adjustable mouth
- Skewed blade makes cutting easier and helps pull the fence into the work
- Supplied with a PM-V11 lapped blade, 3.2mm thick
- View full description
Customers Also Viewed
Recommended Accessories
-
-
-
-
Axminster Professional Combination Square Metric 300mmSpecial Price £14.98 £12.48 was £18.88 £15.73 Save £3.90 £3.25 -
-
-
-
Axminster Professional Stainless Steel Metric Rule - 300mmSpecial Price £2.68 £2.23 was £3.58 £2.98 Save £0.90 £0.75 -
-
-
Axcaliber 12 Piece 1/4" (6.35mm) Long Shank Cutter SetSpecial Price £66.40 £55.33 was £89.98 £74.98 Save £23.58 £19.65 -
WoodSpur Torx Head Wood Screw Assortment (1,500 Pieces)Special Price £24.98 £20.82 was £29.98 £24.98 Save £5.00 £4.17
Show more
Show less
This versatile plane excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A hardwood knob locks the toe to control the mouth opening. A setscrew in the throat acts as a stop allowing exact repositioning of the toe. The blade sits flush with the plane’s side, so corners are clean and accurate. Set-screws on either side prevent the blade from shifting in use. An adjustable spur, ahead of the blade reduces tear out on cross grain. The blade’s 15° skew, makes cutting easier and helps pull the fence into the work.
A brass knob and collet lock the 88mm long, 8mm thick hardwood fence. Tapped holes in the fence casting allow the fitting of a customised fence. It comes with a PM-V11 lapped blade; 3.2mm thick, 38mm wide with a 25° bevel. The lapped blades have a flatness tolerance of ±0.005mm or better over the working surface, and with an average roughness surface finish of 0.000127mm(5 microinches) or better.