Lamello Tenso P-10 Connector & Pre-load Clip

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Lamello Tenso P-10 Connector & Pre-load Clip

Pack Quantity

From £77.48 £64.57

Qty

No need for clamps, locks joints together instantly
Self-locking, self-clamping for rapid assembly
Invisible, internal clamp with high tensile force
View full description

Recommended Accessories

Lamello Clamex P Medius Connector Pack 80
From £107.88 £89.90
Lamello P-System Drill Jig P-14 and P-10
From £61.48 £51.23
Lamello Clamex P-14 Zeta Connector (Pkt 80)
From £107.88 £89.90
Lamello Divario P-18 Marking Jig With Drill
From £118.98 £99.15
Lamello Tenso P-14 Connectors Pack 80
From £64.48 £53.73
Lamello Tenso Pre-load Tool For P-14 & P-10
From £5.88 £4.90
Lamello P-System Professional Connector Assortment In Sortainer Case
From £644.78 £537.32
Lamello Clamex P-14 Flexus Connector (Pkt 80)
From £107.88 £89.90
Axminster Professional Forged Flat Bar Clamp 200 x 80mm
From £12.98 £10.82
Axminster Professional Stainless Steel Metric Rule - 300mm
From £7.98 £6.65
Rider Square Blade Awl with Hornbeam Handle
From £12.18 £10.15
Axminster Workshop Four Grit Diamond Hone
From £9.98 £8.32

Show less

In Detail

Tenso P-10 has an installation depth of only 10mm, so you can take advantage of the system using thinner material.

The self-locking Tenso P is a two-part concealed connector that forms strong connections in an instant without the need for tools. Tenso P greatly speeds up the assembly process. Its unique design offers numerous benefits, flexibility, speed and simplicity in design, production, transport and assembly.

In effect, the Tenso P is an invisible, internal clamp that firmly pulls each part together whilst the glue dries. The Tenso P removes the need for clamps. Tenso P joints are mechanically locked and tight. Once assembled the connectors are invisible with no indication of their existence.

Tenso joints allow you to snap sections of furniture together in the workshop and then carry out other operations on the piece without clamps getting in the way.

You can glue sub-assemblies together then proceed with final assembly without waiting for the glue to cure.

Using the Pre-load clips considerably reduce the amount of force required when connecting the workpieces, without any loss of clamping power. Pre-load clips speed up assembly and allow the use of the Tenso P in a greater variety of joints.