Earn Points & Save Pounds
Axminster Workshop Dust Extraction Adaptor - 100mm
502568
Axminster Workshop Dust Extraction Adaptor - 100mm
502568
Key Features
- Useful adaptor for sawbenches and router tables
- Flanged 100mm adaptor with 62mm inlet
- Accepts standard 100mm and 63mm hoses
- View full description
Customers Also Viewed
Recommended Accessories
-
-
UJK 50mm Guide Dogs (Pair)From £14.98 £12.48 -
-
Axcaliber 12 Piece 1/4" (6.35mm) Long Shank Cutter SetSpecial Price £79.63 £66.36 was £89.98 £74.98 Save £10.35 £8.62 -
Axminster Workshop Paste Clear Wood WaxFrom £10.38 £8.65 -
Axminster Professional Forged Flat Bar Clamp 200 x 80mmFrom £15.58 £12.98 -
-
-
-
-
-
WoodSpur Torx Head Wood Screw Assortment (1,500 Pieces)Special Price £24.98 £20.82 was £29.98 £24.98 Save £5.00 £4.17
Show more
Show less
Frequently Bought Together
Router table set-ups and some sawbenches can sometimes present extraction problems, with extraction often required from both above and below the table. This adaptor enables you to achieve this by having a 100mm flanged outlet with a 62mm inlet at the top. A cabinet or enclosure will be required to extract from with a hole made to accept the adaptor. When extraction is connected using a standard 100mm hose, a separate 63mm hose can then be attached to the top of the adaptor and connected to either a dust port on the router table fence or the crown guard of the saw bench. We are sure there must be many other dust extraction situations where this fitting would prove invaluable.